Re: [3/3] ARM: da850: Add ti, da830-uart compatible for serial ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thursday 22 December 2016 09:36 PM, Franklin S Cooper Jr wrote:
> 
> 
> On 12/20/2016 02:23 PM, David Lechner wrote:
>> TI DA8xx/OMAPL13x/AM17xx/AM18xx SoCs have extra UART registers beyond
> 
> Similar comment about adding Keystone SoCs to the list of SoCs.
> 
>> the standard 8250 registers, so we need a new compatible string to
>> indicate this. Also, at least one of these registers uses the full 32
>> bits, so we need to specify reg-io-width in addition to reg-shift.
>>
>> "ns16550a" is left in the compatible specification since it does work
>> as long as the bootloader configures the SoC UART power management
>> registers.
>>
>> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/da850.dtsi | 9 ++++++---
> 
> Similar changes should be made to the various Keystone dtsi files.

That will be a different patch though since the two changes will go
through different trees. And I strongly suspect David does not have
access to a keystone board. So it will have to be done by someone at TI.

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux