Devicetree bindings documentation for the GE B850v3 LVDS/DP++ display bridge. Cc: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx> Cc: Martin Donnelly <martin.donnelly@xxxxxx> Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxx> Cc: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> Cc: Rob Herring <robh@xxxxxxxxxx> Cc: Fabio Estevam <fabio.estevam@xxxxxxx> Signed-off-by: Peter Senna Tschudin <peter.senna@xxxxxxxxxxxxx> --- There was an Acked-by from Rob Herring <robh@xxxxxxxxxx> for V6, but I changed the bindings to use i2c_new_secondary_device() so I removed it from the commit message. .../devicetree/bindings/ge/b850v3-lvds-dp.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt diff --git a/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt new file mode 100644 index 0000000..1bc6ebf --- /dev/null +++ b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt @@ -0,0 +1,39 @@ +Driver for GE B850v3 LVDS/DP++ display bridge + +Required properties: + - compatible : should be "ge,b850v3-lvds-dp". + - reg : should contain the main address which is used to ack the + interrupts and address for edid. + - reg-names : comma separeted list of register names. Valid values + are "main", and "edid". + - interrupt-parent : phandle of the interrupt controller that services + interrupts to the device + - interrupts : one interrupt should be described here, as in + <0 IRQ_TYPE_LEVEL_HIGH>. + - port : should describe the video signal connection between the host + and the bridge. + +Example: + +&mux2_i2c2 { + status = "okay"; + clock-frequency = <100000>; + + b850v3-lvds-dp-bridge@73 { + compatible = "ge,b850v3-lvds-dp"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73 0x72>; + reg-names = "main", "edid"; + + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + port { + b850v3_dp_bridge_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html