Re: [PATCH 2/2] MIPS: BMIPS: Add support SPI device nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On 28 Dec 2016, at 7:12 AM, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
> 
> On 12/26/2016 05:59 PM, Jaedon Shin wrote:
>> Adds SPI device nodes to BCM7xxx MIPS based SoCs.
>> 
>> Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
>> ---
>> arch/mips/boot/dts/brcm/bcm7125.dtsi      | 55 +++++++++++++++++++++++++++++--
>> arch/mips/boot/dts/brcm/bcm7346.dtsi      | 49 +++++++++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm7358.dtsi      | 49 +++++++++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm7360.dtsi      | 49 +++++++++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm7362.dtsi      | 49 +++++++++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm7420.dtsi      | 55 +++++++++++++++++++++++++++++--
>> arch/mips/boot/dts/brcm/bcm7425.dtsi      | 49 +++++++++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm7435.dtsi      | 49 +++++++++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm97125cbmb.dts  |  4 +++
>> arch/mips/boot/dts/brcm/bcm97346dbsmb.dts |  4 +++
>> arch/mips/boot/dts/brcm/bcm97358svmb.dts  | 36 ++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm97360svmb.dts  | 36 ++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm97362svmb.dts  |  4 +++
>> arch/mips/boot/dts/brcm/bcm97420c.dts     |  4 +++
>> arch/mips/boot/dts/brcm/bcm97425svmb.dts  | 36 ++++++++++++++++++++
>> arch/mips/boot/dts/brcm/bcm97435svmb.dts  |  4 +++
>> 16 files changed, 526 insertions(+), 6 deletions(-)
>> 
>> diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
>> index bbd00f65ce39..c1e19e57f64a 100644
>> --- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
>> +++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
>> @@ -46,6 +46,12 @@
>> 			#clock-cells = <0>;
>> 			clock-frequency = <27000000>;
>> 		};
>> +
>> +		spi_clk: spi_clk {
>> +			compatible = "fixed-clock";
>> +			#clock-cells = <0>;
>> +			clock-frequency = <27000000>;
>> +		};
> 
> Nit, this should actually be upg_clk, since this is the clock that the
> SPI controller uses, and it is a fixed-clock with a 27Mhz frequency.
> 
> Other than that, the rest looks good to me, thanks!
> -- 
> Florian

I will change the qspi uses upg_clk in v2.

Thanks,
Jaedon

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux