Hi Elaine,
Am Montag, 26. Dezember 2016, 11:45:28 CET schrieb Elaine Zhang:
> Add devicetree bindings for Rockchip cru which found on
> Rockchip SoCs.
>
> Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
> ---
> .../bindings/clock/rockchip,rk3328-cru.txt | 57
> ++++++++++++++++++++++ 1 file changed, 57 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
> b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt new file
> mode 100644
> index 000000000000..20053494d49f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt
> @@ -0,0 +1,57 @@
> +* Rockchip RK3328 Clock and Reset Unit
> +
> +The RK3328 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: should be "rockchip,rk3328-cru"
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> + If missing pll rates are not changeable, due to the missing pll lock
> status. +
> +Each clock is assigned an identifier and client nodes can use this
> identifier +to specify the clock which they consume. All available clocks
> are defined as +preprocessor macros in the dt-bindings/clock/rk3328-cru.h
> headers and can be +used in device tree sources. Similar macros exist for
> the reset sources in +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "clkin_i2s" - external I2S clock - optional,
> + - "gmac_clkin" - external GMAC clock - optional
> + - "phy_50m_out" - output clock of the pll in the mac phy
> +
> +Example: Clock controller node:
> +
> + cru: clock-controller@ff440000 {
> + compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
Rob suggested dropping the "rockchip,cru" and "syscon" properties from the
example and I definitly agree with that.
Otherwise look ok to me.
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
