Hi Nicolas On Wed, Dec 21, 2016 at 3:00 PM, Nicolas Saenz Julienne <nicolas.saenz@xxxxxxxxxx> wrote: > Hi Manish, thanks for the interest. > > On 20/12/16 17:54, Manish Badarkhe wrote: >> Hi Nicola >> > [...] >> >> Just some general comment, Can you add some more properties here to >> know voltage and current? > > I assume you are mentioning reading current and voltage values. These > properties are not supported by the sbs-charger standard. All you can do > is set (write only) the charging current and charging voltage values. > Yet in all the boards I've worked with it's the sbs-battery compliant > chip that takes care of it. thanks for clarifying me. >> Also, can you add other properties present in charging status register >> like POWER_FAIL, VOLTAGE_OR, >> CURRENT_OR etc. > > CURRENT_OR and VOLTAGE_OR relate to wrong values in the charging > voltage/current registers. Since the sbs-battery chip takes care of it I > don't see any use for it. > POWER_FAIL marks there is not enough voltage to charge the battery. I > don't need that information so I did nothing to integrate it. Having a > quick look at the power supply defines I don't see were it could easily fit. thanks for clarifying me. Regards Manish Badarkhe -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
