From: Markus Mayer <mmayer@xxxxxxxxxxxx>
Add binding document for brcm,brcmstb-cpu-clk-div.
Signed-off-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
---
.../bindings/clock/brcm,brcmstb-cpu-clk-div.txt | 83 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 84 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/brcm,brcmstb-cpu-clk-div.txt
diff --git a/Documentation/devicetree/bindings/clock/brcm,brcmstb-cpu-clk-div.txt b/Documentation/devicetree/bindings/clock/brcm,brcmstb-cpu-clk-div.txt
new file mode 100644
index 0000000..3bc99c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,brcmstb-cpu-clk-div.txt
@@ -0,0 +1,83 @@
+The CPU divider node serves as the sole clock for the CPU complex. It supports
+power-of-2 clock division, with a divider of "1" as the default highest-speed
+setting.
+
+Required properties:
+- compatible: shall be "brcm,brcmstb-cpu-clk-div"
+- reg: address and width of the divider configuration register
+- #clock-cells: shall be set to 0
+- clocks: phandle of clock provider which provides the source clock
+ (this would typically be a "fixed-clock" type PLL)
+- div-table: list of (raw_value,divider) ordered pairs that correspond to the
+ allowed clock divider settings
+- div-shift-width: least-significant bit position and width of divider value
+
+Optional properties:
+- clocks: additional clocks can be specified if needed
+- clock-names: clocks can be named, so they can be looked up
+
+Example:
+ sw_scb: sw_scb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <432000000>;
+ };
+
+ fixed0: fixed0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <54000000>;
+ };
+
+ cpu_pdiv: cpu_pdiv@f04e0008 {
+ compatible = "divider-clock";
+ #clock-cells = <0>;
+ reg = <0xf04e0008 0x4>;
+ bit-shift = <10>;
+ bit-mask = <0xf>;
+ index-starts-at-one;
+ clocks = <&fixed0>;
+ clock-names = "fixed0";
+ };
+
+ cpu_ndiv_int: cpu_ndiv_int {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <167>;
+ clocks = <&cpu_pdiv>;
+ clock-names = "cpu_pdiv";
+ };
+
+ cpu_mdiv_ch0: cpu_mdiv_ch0@f04e0000 {
+ compatible = "divider-clock";
+ #clock-cells = <0>;
+ reg = <0xf04e0000 0x4>;
+ bit-shift = <1>;
+ bit-mask = <0xff>;
+ index-starts-at-one;
+ clocks = <&cpu_ndiv_int>;
+ clock-names = "cpu_ndiv_int";
+ };
+
+ cpupll: cpupll@0 {
+ #clock-cells = <0>;
+ clock-frequency = <1503000000>;
+ compatible = "fixed-clock";
+ };
+
+ cpuclkdiv: cpu-clk-div@0 {
+ #clock-cells = <0>;
+ clock-names = "cpupll",
+ "cpu_mdiv_ch0",
+ "cpu_ndiv_int",
+ "sw_scb";
+ clocks = <&cpupll,
+ &cpu_mdiv_ch0,
+ &cpu_ndiv_int,
+ &sw_scb>;
+ compatible = "brcm,brcmstb-cpu-clk-div";
+ reg = <0xf03e257c 0x4>;
+ div-table = <0x00 1>;
+ div-shift-width = <0 5>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index f6eb97b..5473b31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2786,6 +2786,7 @@ M: bcm-kernel-feedback-list@xxxxxxxxxxxx
L: linux-pm@xxxxxxxxxxxxxxx
S: Maintained
F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+F: Documentation/devicetree/bindings/clock/brcm,brcmstb-cpu-clk-div.txt
F: drivers/cpufreq/brcmstb*
BROADCOM SPECIFIC AMBA DRIVER (BCMA)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
