Re: [PATCH v11 1/2] [media] exynos5-is: Adds DT binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Arun,

(Adding Mark and Mauro to Cc)

On 05/11/13 12:19, Arun Kumar K wrote:
> From: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
> 
> The patch adds the DT binding doc for exynos5 SoC camera
> subsystem.
> 
> Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
> Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx>
> ---
>  .../bindings/media/exynos5250-camera.txt           |  126 ++++++++++++++++++++
>  1 file changed, 126 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/exynos5250-camera.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/exynos5250-camera.txt b/Documentation/devicetree/bindings/media/exynos5250-camera.txt
> new file mode 100644
> index 0000000..09420ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/exynos5250-camera.txt
> @@ -0,0 +1,126 @@
> +Samsung EXYNOS5 SoC Camera Subsystem
> +------------------------------------
> +
> +The Exynos5 SoC Camera subsystem comprises of multiple sub-devices
> +represented by separate device tree nodes. Currently this includes: FIMC-LITE,
> +MIPI CSIS and FIMC-IS.
> +
> +The sub-device nodes are referenced using phandles in the common 'camera' node
> +which also includes common properties of the whole subsystem not really
> +specific to any single sub-device, like common camera port pins or the common
> +camera bus clocks.
> +
> +Common 'camera' node
> +--------------------
> +
> +Required properties:
> +
> +- compatible		: must be "samsung,exynos5250-fimc"
> +- clocks		: list of clock specifiers, corresponding to entries in
> +                          the clock-names property
> +- clock-names		: must contain "sclk_bayer" entry
> +- samsung,csis		: list of phandles to the mipi-csis device nodes
> +- samsung,fimc-lite	: list of phandles to the fimc-lite device nodes
> +- samsung,fimc-is	: phandle to the fimc-is device node
> +
> +The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
> +to define a required pinctrl state named "default".
> +
> +'parallel-ports' node
> +---------------------
> +
> +This node should contain child 'port' nodes specifying active parallel video
> +input ports. It includes camera A, camera B and RGB bay inputs.
> +'reg' property in the port nodes specifies the input type:
> + 1 - parallel camport A
> + 2 - parallel camport B
> + 5 - RGB camera bay
> +
> +3, 4 are for MIPI CSI-2 bus and are already described in samsung-mipi-csis.txt

Was there posted a version of this patch with Mark's comments addressed:
http://www.spinics.net/lists/devicetree/msg11550.html ? I couldn't find it.

-- 
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux