Hi Andi,
This patch breaks all rc devices, none of them have input devices any
more (see below).
On Wed, Dec 14, 2016 at 11:00:26PM +0900, Andi Shyti wrote:
> Move the input device allocation, map and protocol handling to
> different functions.
>
> Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
> Reviewed-by: Sean Young <sean@xxxxxxxx>
> ---
> drivers/media/rc/rc-main.c | 143 +++++++++++++++++++++++++--------------------
> 1 file changed, 81 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
> index a6bbceb..59fac96 100644
> --- a/drivers/media/rc/rc-main.c
> +++ b/drivers/media/rc/rc-main.c
> @@ -1436,16 +1436,12 @@ struct rc_dev *devm_rc_allocate_device(struct device *dev,
> }
> EXPORT_SYMBOL_GPL(devm_rc_allocate_device);
>
> -int rc_register_device(struct rc_dev *dev)
> +static int rc_setup_rx_device(struct rc_dev *dev)
> {
> - static bool raw_init = false; /* raw decoders loaded? */
> - struct rc_map *rc_map;
> - const char *path;
> - int attr = 0;
> - int minor;
> int rc;
> + struct rc_map *rc_map;
>
> - if (!dev || !dev->map_name)
> + if (!dev->map_name)
> return -EINVAL;
>
> rc_map = rc_map_get(dev->map_name);
> @@ -1454,6 +1450,19 @@ int rc_register_device(struct rc_dev *dev)
> if (!rc_map || !rc_map->scan || rc_map->size == 0)
> return -EINVAL;
>
> + rc = ir_setkeytable(dev, rc_map);
> + if (rc)
> + return rc;
> +
> + if (dev->change_protocol) {
> + u64 rc_type = (1ll << rc_map->rc_type);
> +
> + rc = dev->change_protocol(dev, &rc_type);
> + if (rc < 0)
> + goto out_table;
> + dev->enabled_protocols = rc_type;
> + }
> +
> set_bit(EV_KEY, dev->input_dev->evbit);
> set_bit(EV_REP, dev->input_dev->evbit);
> set_bit(EV_MSC, dev->input_dev->evbit);
> @@ -1463,6 +1472,61 @@ int rc_register_device(struct rc_dev *dev)
> if (dev->close)
> dev->input_dev->close = ir_close;
>
> + /*
> + * Default delay of 250ms is too short for some protocols, especially
> + * since the timeout is currently set to 250ms. Increase it to 500ms,
> + * to avoid wrong repetition of the keycodes. Note that this must be
> + * set after the call to input_register_device().
> + */
> + dev->input_dev->rep[REP_DELAY] = 500;
> +
> + /*
> + * As a repeat event on protocols like RC-5 and NEC take as long as
> + * 110/114ms, using 33ms as a repeat period is not the right thing
> + * to do.
> + */
> + dev->input_dev->rep[REP_PERIOD] = 125;
> +
> + /* rc_open will be called here */
> + rc = input_register_device(dev->input_dev);
> + if (rc)
> + goto out_table;
> +
> + dev->input_dev->dev.parent = &dev->dev;
> + memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
> + dev->input_dev->phys = dev->input_phys;
> + dev->input_dev->name = dev->input_name;
I was testing your changes, and with this patch none of my rc devices
have input devices associated with them. The problem is that you've changed
the order: input_register_device() should happen AFTER the preceding
4 lines.
> +
> + return 0;
> +
> +out_table:
> + ir_free_table(&dev->rc_map);
> +
> + return rc;
> +}
> +
> +static void rc_free_rx_device(struct rc_dev *dev)
> +{
> + if (!dev)
> + return;
> +
> + ir_free_table(&dev->rc_map);
> +
> + input_unregister_device(dev->input_dev);
> + dev->input_dev = NULL;
> +}
> +
> +int rc_register_device(struct rc_dev *dev)
> +{
> + static bool raw_init = false; /* raw decoders loaded? */
> + const char *path;
> + int attr = 0;
> + int minor;
> + int rc;
> +
> + if (!dev)
> + return -EINVAL;
> +
> minor = ida_simple_get(&rc_ida, 0, RC_DEV_MAX, GFP_KERNEL);
> if (minor < 0)
> return minor;
> @@ -1486,39 +1550,15 @@ int rc_register_device(struct rc_dev *dev)
> if (rc)
> goto out_unlock;
>
> - rc = ir_setkeytable(dev, rc_map);
> - if (rc)
> - goto out_dev;
See the original order here.
> -
> - dev->input_dev->dev.parent = &dev->dev;
> - memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
> - dev->input_dev->phys = dev->input_phys;
> - dev->input_dev->name = dev->input_name;
> -
> - rc = input_register_device(dev->input_dev);
> - if (rc)
> - goto out_table;
> -
> - /*
> - * Default delay of 250ms is too short for some protocols, especially
> - * since the timeout is currently set to 250ms. Increase it to 500ms,
> - * to avoid wrong repetition of the keycodes. Note that this must be
> - * set after the call to input_register_device().
> - */
> - dev->input_dev->rep[REP_DELAY] = 500;
> -
> - /*
> - * As a repeat event on protocols like RC-5 and NEC take as long as
> - * 110/114ms, using 33ms as a repeat period is not the right thing
> - * to do.
> - */
> - dev->input_dev->rep[REP_PERIOD] = 125;
> -
> path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
> dev_info(&dev->dev, "%s as %s\n",
> dev->input_name ?: "Unspecified device", path ?: "N/A");
> kfree(path);
>
> + rc = rc_setup_rx_device(dev);
> + if (rc)
> + goto out_dev;
> +
> if (dev->driver_type == RC_DRIVER_IR_RAW) {
> if (!raw_init) {
> request_module_nowait("ir-lirc-codec");
> @@ -1526,36 +1566,20 @@ int rc_register_device(struct rc_dev *dev)
> }
> rc = ir_raw_event_register(dev);
> if (rc < 0)
> - goto out_input;
> - }
> -
> - if (dev->change_protocol) {
> - u64 rc_type = (1ll << rc_map->rc_type);
> - rc = dev->change_protocol(dev, &rc_type);
> - if (rc < 0)
> - goto out_raw;
> - dev->enabled_protocols = rc_type;
> + goto out_rx;
> }
>
> /* Allow the RC sysfs nodes to be accessible */
> atomic_set(&dev->initialized, 1);
>
> - IR_dprintk(1, "Registered rc%u (driver: %s, remote: %s, mode %s)\n",
> + IR_dprintk(1, "Registered rc%u (driver: %s)\n",
> dev->minor,
> - dev->driver_name ? dev->driver_name : "unknown",
> - rc_map->name ? rc_map->name : "unknown",
> - dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked");
> + dev->driver_name ? dev->driver_name : "unknown");
>
> return 0;
>
> -out_raw:
> - if (dev->driver_type == RC_DRIVER_IR_RAW)
> - ir_raw_event_unregister(dev);
> -out_input:
> - input_unregister_device(dev->input_dev);
> - dev->input_dev = NULL;
> -out_table:
> - ir_free_table(&dev->rc_map);
> +out_rx:
> + rc_free_rx_device(dev);
> out_dev:
> device_del(&dev->dev);
> out_unlock:
> @@ -1601,12 +1625,7 @@ void rc_unregister_device(struct rc_dev *dev)
> if (dev->driver_type == RC_DRIVER_IR_RAW)
> ir_raw_event_unregister(dev);
>
> - /* Freeing the table should also call the stop callback */
> - ir_free_table(&dev->rc_map);
> - IR_dprintk(1, "Freed keycode table\n");
> -
> - input_unregister_device(dev->input_dev);
> - dev->input_dev = NULL;
> + rc_free_rx_device(dev);
>
> device_del(&dev->dev);
>
> --
> 2.10.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
