Hi Ramiro, Thank you for the patch. On Wednesday 14 Dec 2016 17:18:23 Ramiro Oliveira wrote: > Add reset property documentation for Xilinx DMA > > Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt > b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt index > a2b8bfa..7ebce72 100644 > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt > @@ -40,6 +40,10 @@ Required properties for VDMA: > Optional properties: > - xlnx,include-sg: Tells configured for Scatter-mode in > the hardware. > +- resets : Must contain an entry for each entry in reset-names. > + See ../reset/reset.txt for details. > +- reset-names : Must include the following entries: > + - reset If the IP core has a single reset, can't we omit the name ? > Optional properties for AXI DMA: > - xlnx,mcdma: Tells whether configured for multi-channel mode in the > hardware. Optional properties for VDMA: > @@ -83,6 +87,8 @@ axi_vdma_0: axivdma@40030000 { > clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>; > clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", > "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"; > + resets = <&rst 2>; > + reset-names = "reset"; > dma-channel@40030000 { > compatible = "xlnx,axi-vdma-mm2s-channel"; > interrupts = < 0 54 4 >; -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html