The node name for the power seq pin is mmc2@0 like the mmc2_pins_a one. This makes the original node (mmc2_pins_a) scrapped out of the dtb and result in a unusable eMMC if U-Boot didn't configured the pins to the correct functions. Changes since v1: * Rename the node mmc2-rst-pin Signed-off-by: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 5ea4915..10d3074 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -56,7 +56,7 @@ }; &pio { - mmc2_pins_nrst: mmc2@0 { + mmc2_pins_nrst: mmc2-rst-pin { allwinner,pins = "PC16"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; -- 2.9.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html