Hello Bartlomiej,
On 12/13/2016 01:52 PM, Bartlomiej Zolnierkiewicz wrote:
> Add missing 2000MHz & 1900MHz OPPs (for A15 cores) and 1400MHz OPP
> (for A7 cores). Also update common Odroid-XU3 Lite/XU3/XU4 thermal
> cooling maps to account for new OPPs.
>
> Since new OPPs are not available on all Exynos5422/5800 boards modify
> dts files for Odroid-XU3 Lite (limited to 1.8 GHz / 1.3 GHz) & Peach
> Pi (limited to 2.0 GHz / 1.3 GHz) accordingly.
>
> Tested on Odroid-XU3 and XU3 Lite.
>
> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
> Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> Cc: Andreas Faerber <afaerber@xxxxxxx>
> Cc: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> Cc: Ben Gamari <ben@xxxxxxxxxxxxxxxx>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 14 +++++++-------
> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 17 +++++++++++++++++
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 ++++
> arch/arm/boot/dts/exynos5800.dtsi | 15 +++++++++++++++
> 4 files changed, 43 insertions(+), 7 deletions(-)
>
> Index: b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> ===================================================================
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi 2016-12-13 15:59:33.779763261 +0100
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi 2016-12-13 15:59:33.775763261 +0100
> @@ -118,7 +118,7 @@
> /*
> * When reaching cpu_alert3, reduce CPU
> * by 2 steps. On Exynos5422/5800 that would
> - * be: 1600 MHz and 1100 MHz.
> + * (usually) be: 1800 MHz and 1200 MHz.
> */
> map3 {
> trip = <&cpu_alert3>;
> @@ -131,16 +131,16 @@
>
> /*
> * When reaching cpu_alert4, reduce CPU
> - * further, down to 600 MHz (11 steps for big,
> - * 7 steps for LITTLE).
> + * further, down to 600 MHz (13 steps for big,
> + * 8 steps for LITTLE).
> */
> - map5 {
> + cooling_map5: map5 {
> trip = <&cpu_alert4>;
> - cooling-device = <&cpu0 3 7>;
> + cooling-device = <&cpu0 3 8>;
> };
> - map6 {
> + cooling_map6: map6 {
> trip = <&cpu_alert4>;
> - cooling-device = <&cpu4 3 11>;
> + cooling-device = <&cpu4 3 13>;
> };
> };
> };
> Index: b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
> ===================================================================
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts 2016-12-13 15:59:33.779763261 +0100
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts 2016-12-13 15:59:33.775763261 +0100
> @@ -21,6 +21,23 @@
> compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
> };
>
> +&cluster_a15_opp_table {
> + /delete-node/opp@2000000000;
> + /delete-node/opp@1900000000;
> +};
> +
> +&cluster_a7_opp_table {
> + /delete-node/opp@1400000000;
> +};
> +
I think that a comment in the DTS why these operating points aren't available
in this board will make more clear why the nodes are being deleted.
> +&cooling_map5 {
> + cooling-device = <&cpu0 3 7>;
> +};
> +
> +&cooling_map6 {
> + cooling-device = <&cpu4 3 11>;
> +};
> +
> &pwm {
> /*
> * PWM 0 -- fan
> Index: b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> ===================================================================
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts 2016-12-13 15:59:33.779763261 +0100
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts 2016-12-13 15:59:33.779763261 +0100
> @@ -146,6 +146,10 @@
> vdd-supply = <&ldo9_reg>;
> };
>
> +&cluster_a7_opp_table {
> + /delete-property/opp@1400000000;
> +};
> +
> &cpu0 {
> cpu-supply = <&buck2_reg>;
> };
> Index: b/arch/arm/boot/dts/exynos5800.dtsi
> ===================================================================
> --- a/arch/arm/boot/dts/exynos5800.dtsi 2016-12-13 15:59:33.779763261 +0100
> +++ b/arch/arm/boot/dts/exynos5800.dtsi 2016-12-13 15:59:33.779763261 +0100
> @@ -24,6 +24,16 @@
> };
>
> &cluster_a15_opp_table {
> + opp@2000000000 {
> + opp-hz = /bits/ 64 <2000000000>;
> + opp-microvolt = <1250000>;
> + clock-latency-ns = <140000>;
> + };
> + opp@1900000000 {
> + opp-hz = /bits/ 64 <1900000000>;
> + opp-microvolt = <1250000>;
> + clock-latency-ns = <140000>;
> + };
> opp@1700000000 {
> opp-microvolt = <1250000>;
> };
> @@ -85,6 +95,11 @@
> };
>
AFAIK Thomas restricted the maximum OPP, because for A15 freqs > 1.8GHz the
INT rail would need to be scaled up as well since there's a maximum voltage
difference between the ARM and INT rails before the system becomes unstable:
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/276766.html
https://lkml.org/lkml/2014/5/2/419
The ChromiumOS vendor tree uses a virtual regulator driver that makes sure
the maximum voltage skew is between a limit. But that never made to mainline:
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.8/arch/arm/boot/dts/exynos5420-peach-pit.dtsi#90
https://lkml.org/lkml/2014/4/29/28
Did that change and there's infrastructure in mainline now to cope with that?
If that's the case, I think it would be good to mention in the commit message.
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
