On Tue, Dec 13, 2016 at 10:28 AM, Benjamin Gaignard
<benjamin.gaignard@xxxxxxxxxx> wrote:
> 2016-12-13 16:57 GMT+01:00 Rob Herring <robh@xxxxxxxxxx>:
>> On Tue, Dec 13, 2016 at 5:11 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>>> On Mon, 12 Dec 2016, Rob Herring wrote:
>>>
>>>> On Fri, Dec 09, 2016 at 03:15:14PM +0100, Benjamin Gaignard wrote:
>>>> > Define bindings for pwm-stm32
>>>> >
>>>> > version 6:
>>>> > - change st,breakinput parameter format to make it usuable on stm32f7 too.
>>>> >
>>>> > version 2:
>>>> > - use parameters instead of compatible of handle the hardware configuration
>>>> >
>>>> > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
>>>> > ---
>>>> > .../devicetree/bindings/pwm/pwm-stm32.txt | 33 ++++++++++++++++++++++
>>>> > 1 file changed, 33 insertions(+)
>>>> > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt
>>>> >
>>>> > diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
>>>> > new file mode 100644
>>>> > index 0000000..866f222
>>>> > --- /dev/null
>>>> > +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
>>>> > @@ -0,0 +1,33 @@
>>>> > +STMicroelectronics STM32 Timers PWM bindings
>>>> > +
>>>> > +Must be a sub-node of an STM32 Timers device tree node.
>>>> > +See ../mfd/stm32-timers.txt for details about the parent node.
>>>> > +
>>>> > +Required parameters:
>>>> > +- compatible: Must be "st,stm32-pwm".
>>>> > +- pinctrl-names: Set to "default".
>>>> > +- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
>>>> > + For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
>>>> > +
>>>> > +Optional parameters:
>>>> > +- st,breakinput: Arrays of three u32 <index level filter> to describe break input configurations.
>>>> > + "index" indicates on which break input the configuration should be applied.
>>>> > + "level" gives the active level (0=low or 1=high) for this configuration.
>>>> > + "filter" gives the filtering value to be applied.
>>>> > +
>>>> > +Example:
>>>> > + timers@40010000 {
>>>>
>>>> timer@...
>>>
>>> No, it should be timers.
>>
>> Read the spec. "timer" is a generic node name. "timers" is not. How
>> many is not relevant.
>
> "timer" is already used in stm32 DT for clocksource node... It is also why
> I use "timers" for this.
That doesn't matter. They are at different levels in the hierarchy.
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
