Hi Kukjin,
Even though you said it is applied, I didn't see this patch in any of
your trees.
Can you kindly look into this patch and take necessary action..?
Best Wishes,
Leela Krishna.
On Tue, Nov 12, 2013 at 8:13 PM, Kukjin Kim <kgene@xxxxxxxxxx> wrote:
> Leela Krishna Amudala wrote:
>>
> + dt ml.
>
>> From: Padmavathi Venna <padma.v@xxxxxxxxxxx>
>>
>> This patch adds dma controller node info on Exynos5420.
>> Exynos5420 has adma for audio IPs. As adma clk is dependent
>> on audss clk provider that will be added later.
>>
>> Signed-off-by: Padmavathi Venna <padma.v@xxxxxxxxxxx>
>> Signed-off-by: Leela Krishna Amudala <l.krishna@xxxxxxxxxxx>
>> ---
>> Change since V2:
>> - Removed adma node as adma clock is dependent audss clock provider.
>>
>> Changes since V1:
>> - In V1, dma node common stuff was added in common exynos5.dtsi
> file.
>> This was removed as per Kukjin comment and added in
>> exynos5420.dtsi.
>>
>> arch/arm/boot/dts/exynos5420.dtsi | 52
>> +++++++++++++++++++++++++++++++++++++
>> 1 file changed, 52 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi
>> b/arch/arm/boot/dts/exynos5420.dtsi
>> index d537cd7..15465f8 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -186,6 +186,58 @@
>> status = "okay";
>> };
>>
>> + amba {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "arm,amba-bus";
>> + interrupt-parent = <&gic>;
>> + ranges;
>> +
>> + pdma0: pdma@121A0000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x121A0000 0x1000>;
>> + interrupts = <0 34 0>;
>> + clocks = <&clock 362>;
>> + clock-names = "apb_pclk";
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <32>;
>> + };
>> +
>> + pdma1: pdma@121B0000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x121B0000 0x1000>;
>> + interrupts = <0 35 0>;
>> + clocks = <&clock 363>;
>> + clock-names = "apb_pclk";
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <32>;
>> + };
>> +
>> + mdma0: mdma@10800000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x10800000 0x1000>;
>> + interrupts = <0 33 0>;
>> + clocks = <&clock 473>;
>> + clock-names = "apb_pclk";
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <1>;
>> + };
>> +
>> + mdma1: mdma@11C10000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x11C10000 0x1000>;
>> + interrupts = <0 124 0>;
>> + clocks = <&clock 442>;
>> + clock-names = "apb_pclk";
>> + #dma-cells = <1>;
>> + #dma-channels = <8>;
>> + #dma-requests = <1>;
>> + };
>> + };
>> +
>> serial@12C00000 {
>> clocks = <&clock 257>, <&clock 128>;
>> clock-names = "uart", "clk_uart_baud0";
>> --
>> 1.7.10.4
>
> Sorry for late response.
>
> Looks OK to me, many properties for dma are same with 5250 though...
>
> Applied, thanks.
> - Kukjin
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
