This series contains the last DT changes required for LCDC support on da850-lcdk. The first one adds the dumb-vga-dac nodes, the second limits the maximum pixel clock rate. v1 -> v2: - drop patch 3/3 (already merged) - use max-pixelclock instead of max-bandwidth for display mode limiting v2 -> v3: - make the commit message in patch [2/2] more detailed - move the max-pixelclock property to da850.dtsi as the limit affects all da850-based boards v3 -> v4: - remove the input port from the display node - move the display ports node to da850-lcdk.dts - rename the vga_bridge node to vga-bridge - move the LCDC pins to the LCDC node (from the vga bridge node) v4 -> v5: - rename the display label to lcdc - instead of using the 'dumb-vga-dac' compatible, add bindings for ti,ths8135 and use it as the vga-bridge node compatible v5 -> v6: - drop the endpoint numbers for nodes with single endpoints - split patch 2/4 from v5 into two separate patches: one adding DT bindings and one adding actual support for ths8135 Bartosz Golaszewski (5): ARM: dts: da850: rename the display node label drm: bridge: add DT bindings for TI ths8135 drm: bridge: add support for TI ths8135 ARM: dts: da850-lcdk: add the vga-bridge node ARM: dts: da850: specify the maximum pixel clock rate for tilcdc .../bindings/display/bridge/ti,ths8135.txt | 52 +++++++++++++++++ arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++ arch/arm/boot/dts/da850.dtsi | 3 +- drivers/gpu/drm/bridge/dumb-vga-dac.c | 1 + 4 files changed, 122 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html