Add Timers and it sub-nodes into DT for stm32f429 family.
version 6:
- split patch in two: one for SoC family and one for stm32f469
discovery board.
version 5:
- rename gptimer node to timers
- re-order timers node par addresses
version 4:
- remove unwanted indexing in pwm@ and timer@ node name
- use "reg" instead of additional parameters to set timer
configuration
version 3:
- use "st,stm32-timer-trigger" in DT
version 2:
- use parameters to describe hardware capabilities
- do not use references for pwm and iio timer subnodes
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
---
arch/arm/boot/dts/stm32f429.dtsi | 275 +++++++++++++++++++++++++++++++++++++++
1 file changed, 275 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index bca491d..d0fb9cc 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -355,6 +355,21 @@
slew-rate = <2>;
};
};
+
+ pwm1_pins: pwm@1 {
+ pins {
+ pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+ <STM32F429_PB13_FUNC_TIM1_CH1N>,
+ <STM32F429_PB12_FUNC_TIM1_BKIN>;
+ };
+ };
+
+ pwm3_pins: pwm@3 {
+ pins {
+ pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+ <STM32F429_PB5_FUNC_TIM3_CH2>;
+ };
+ };
};
rcc: rcc@40023810 {
@@ -426,6 +441,266 @@
interrupts = <80>;
clocks = <&rcc 0 38>;
};
+
+ timers2: timers@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc 0 128>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
+ timers3: timers@40000400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000400 0x400>;
+ clocks = <&rcc 0 129>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ timers4: timers@40000800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000800 0x400>;
+ clocks = <&rcc 0 130>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
+ timers5: timers@40000C00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000C00 0x400>;
+ clocks = <&rcc 0 131>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
+ timers6: timers@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc 0 132>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
+ timers7: timers@40001400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001400 0x400>;
+ clocks = <&rcc 0 133>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timers@40001800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001800 0x400>;
+ clocks = <&rcc 0 134>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <9>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timers@40001C00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001C00 0x400>;
+ clocks = <&rcc 0 135>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers14: timers@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc 0 136>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers1: timers@40010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 160>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timers@40010400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010400 0x400>;
+ clocks = <&rcc 0 161>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
+ timers9: timers@40014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014000 0x400>;
+ clocks = <&rcc 0 176>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer {
+ compatible = "st,stm32-timer-trigger";
+ reg = <8>;
+ status = "disabled";
+ };
+ };
+
+ timers10: timers@40014400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014400 0x400>;
+ clocks = <&rcc 0 177>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers11: timers@40014800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014800 0x400>;
+ clocks = <&rcc 0 178>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
