On Thursday 12 December 2013 01:25 PM, Huang Shijie wrote:
On Fri, Dec 06, 2013 at 07:54:48PM +0530, Sourav Poddar wrote:
Adapt driver to do a memory mapped read.
@@ -109,6 +109,7 @@ struct m25p {
u8 program_opcode;
u8 *command;
enum read_type flash_read;
+ void __iomem *mem_addr;
I think we can remove this field.
You can use a local variable in the m25p80_read.
};
static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
@@ -515,6 +516,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct m25p *flash = mtd_to_m25p(mtd);
+ struct spi_master *master = flash->spi->master;
struct spi_transfer t[2];
struct spi_message m;
uint8_t opcode;
@@ -523,6 +525,20 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
__func__, (u32)from, len);
+ if (master->mmap) {
+ mutex_lock(&flash->lock);
+ /* Wait till previous write/erase is done. */
+ if (wait_till_ready(flash)) {
+ mutex_unlock(&flash->lock);
+ return 1;
+ }
+ flash->mem_addr = master->get_buf(master);
+ memcpy(buf, flash->mem_addr + from, len);
+ master->put_buf(master);
+ *retlen = len;
+ goto out;
+ }
+
spi_message_init(&m);
memset(t, 0, (sizeof t));
@@ -558,6 +574,7 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
*retlen = m.actual_length - m25p_cmdsz(flash) - dummy;
+out:
mutex_unlock(&flash->lock);
return 0;
@@ -1286,6 +1303,9 @@ static int m25p_probe(struct spi_device *spi)
flash->addr_width = 3;
}
+ if (spi->master->configure_from_slave)
+ m25p80_fill_flash_information(flash);
+
You have add a configure_from_slave hook in the SPI, why you also need
a same hook in the SPI-NOR framework?
We need a way to provoke this, currently it is placed in m25p80. If m25p80
is removed, for where should I handle these in nor framework?
And i think the enable_mmap/disable_mmap is not needed too.
All the three hooks are used to set the SPI bus controller.
And the SPI-NOR framework only handles the issues between the
SPI bus controller and the SPI-NOR, or the SPI-NOR controller and the
SPI-NOR.
My controller can be used as spi flash controller as well as a spi
controller.
thanks
Huang Shijie
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html