On Fri, 9 Dec 2016 08:22:37 +0100 (CET) Stefan Wahren <stefan.wahren@xxxxxxxx> wrote: > Hi, > > > Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> hat am 2. Dezember 2016 um 14:48 geschrieben: > > > > > > Sorry for the noise, but I forgot to Cc the DT maintainers. > > > > Here is the 2nd version of the VC4/VEC series. > > > > We still miss the two clock patches mentioned by Eric in the first > > version to make the encoder work no matter the setting applied by the > > bootloader. > > are there any advices to test this feature? Apply these patches [1][2][3][4] in addition to this series, and you should see the SDTV output when running modetest (this is what I used to test/debug the driver). This is the command I use to test the SDTV output in NTSC mode modetest -s 39:720x480 > > Is it possible to use an old Raspberry Pi B (256 MB RAM) for this? I did most of my test on a RPi-2, but IIRC, Eric tested it on a RPi (don't know which model). > > Thanks > > Stefan [1]https://patchwork.kernel.org/patch/9442127/ [2]https://patchwork.kernel.org/patch/9456911/ [3]https://patchwork.kernel.org/patch/9456909/ [4]https://patchwork.kernel.org/patch/9456731/ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html