On 2016年12月06日 21:42, Philipp Zabel wrote:
Am Dienstag, den 06.12.2016, 09:51 +0800 schrieb Zhangfei Gao:Add DT bindings documentation for hi3660 SoC reset controller. Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> --- .../bindings/reset/hisilicon,hi3660-reset.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt new file mode 100644 index 0000000..178e478 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.txt @@ -0,0 +1,36 @@ +Hisilicon System Reset Controller +====================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +The reset controller registers are part of the system-ctl block on +hi3660 SoC. + +Required properties: +- compatible: should be + "hisilicon,hi3660-reset" +- #reset-cells: 2, see below +- hisi,rst-syscon: phandle of the reset's syscon. + +Example: + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0x0 0xffd7e000 0x0 0x1000>; + }; + + iomcu_rst: iomcu_rst_controller { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + +Specifying reset lines connected to IP modules +============================================== +example: + + i2c0: i2c@..... { + ... + resets = <&iomcu_rst 0x20 3>; /* offset: 0x20; bit: 3 */Should this mention somewhere what register the offset is supposed to point to? This is the address offset to the set register, with the corresponding clear register being placed at offset + 4.
How about this description. -- #reset-cells: 2, see below - hisi,rst-syscon: phandle of the reset's syscon. +- #reset-cells : Specifies the number of cells needed to encode a + reset source. The type shall be a <u32> and the value shall be 2. + + Cell #1 : offset of the reset assert control + register from the syscon register base + offset + 4: deassert control register + offset + 8: status control register + Cell #2 : bit position of the reset in the reset control register May paste in this thread for a clear view. Thanks -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
