Hi Milo, On Tue, Dec 6, 2016 at 5:08 AM, Milo Kim <woogyom.kim@xxxxxxxxx> wrote: > Poslab Savageboard is i.MX6 SoC base, but BSP code from the vendor is > not mainline u-boot and kernel. Personal reason of using this board is > testing etnaviv user-space driver, so I re-write device tree files based on > mainline kernel for the first step. > > This patchset includes common DT file, dual and quad board files. > > Supported components are > - Display: HDMI and LVDS panel > - eMMC and SD card > - Ethernet > - Pinmux configuration > - SATA: only for Savageboard quad > - UART1 for debug console > - USB host > > Missing features are > - Audio (WM8903) > - USB OTG > - PMIC WM8326: default settings are used so no issue to bring-up the system > - MIPI DSI, CSI > > Patches are tested on the Savageboard quad but the dual version should work > because the only difference between dual and quad is SATA support. > > More information in http://www.savageboard.org > > v2: > Fix DT node for regulator, phy-reset-gpios and iomuxc node. > > Milo Kim (3): > ARM: dts: imx6: Add Savageboard common file > ARM: dts: imx6: Support Savageboard dual > ARM: dts: imx6: Support Savageboard quad > > arch/arm/boot/dts/imx6dl-savageboard.dts | 50 ++++++ > arch/arm/boot/dts/imx6q-savageboard.dts | 54 ++++++ > arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 262 +++++++++++++++++++++++++++++ You missed to add imx6q-savageboard.dtb and imx6dl-savageboard.dtb entries into arch/arm/boot/dts/Makefile -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
