There are two issues with TI CPTS code which are reproducible when TI CPSW ethX device passes few up/down iterations: - cpts refclk prepare counter continuously incremented after each up/down iteration; - devm_clk_get(dev, "cpts") is called many times. Hence, fix these issues by using clk_disable_unprepare() in cpts_clk_release() and skipping devm_clk_get() if cpts refclk has been acquired already. Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Acked-by: Richard Cochran <richardcochran@xxxxxxxxx> --- drivers/net/ethernet/ti/cpts.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/ti/cpts.c b/drivers/net/ethernet/ti/cpts.c index 8cb0369..61198f1 100644 --- a/drivers/net/ethernet/ti/cpts.c +++ b/drivers/net/ethernet/ti/cpts.c @@ -230,18 +230,20 @@ static void cpts_overflow_check(struct work_struct *work) static void cpts_clk_init(struct device *dev, struct cpts *cpts) { - cpts->refclk = devm_clk_get(dev, "cpts"); - if (IS_ERR(cpts->refclk)) { - dev_err(dev, "Failed to get cpts refclk\n"); - cpts->refclk = NULL; - return; + if (!cpts->refclk) { + cpts->refclk = devm_clk_get(dev, "cpts"); + if (IS_ERR(cpts->refclk)) { + dev_err(dev, "Failed to get cpts refclk\n"); + cpts->refclk = NULL; + return; + } } clk_prepare_enable(cpts->refclk); } static void cpts_clk_release(struct cpts *cpts) { - clk_disable(cpts->refclk); + clk_disable_unprepare(cpts->refclk); } static int cpts_match(struct sk_buff *skb, unsigned int ptp_class, -- 2.10.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html