On Mon, Sep 26, 2016 at 8:22 AM, Michal Simek <michal.simek@xxxxxxxxxx> wrote:
> On 23.9.2016 11:48, Jagan Teki wrote:
>> From: Jagan Teki <jteki@xxxxxxxxxxxx>
>>
>> Added basic dts support for MicroZed board.
>>
>> - UART
>> - SDHCI
>> - Ethernet
>>
>> Cc: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
>> Cc: Michal Simek <michal.simek@xxxxxxxxxx>
>> Signed-off-by: Jagan Teki <jteki@xxxxxxxxxxxx>
>> ---
>> Changes for v3:
>> - Add Xilinx copyright
>> Changes for v2:
>> - Add SDHCI
>> - Add Ethernet
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/zynq-microzed.dts | 96 +++++++++++++++++++++++++++++++++++++
>> 2 files changed, 97 insertions(+)
>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index faacd52..4d7b858 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>> wm8750-apc8750.dtb \
>> wm8850-w70v2.dtb
>> dtb-$(CONFIG_ARCH_ZYNQ) += \
>> + zynq-microzed.dtb \
>> zynq-parallella.dtb \
>> zynq-zc702.dtb \
>> zynq-zc706.dtb \
>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>> new file mode 100644
>> index 0000000..b9376a4
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>> @@ -0,0 +1,96 @@
>> +/*
>> + * Copyright (C) 2011 - 2014 Xilinx
>> + * Copyright (C) 2016 Jagan Teki <jteki@xxxxxxxxxxxx>
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +/dts-v1/;
>> +/include/ "zynq-7000.dtsi"
>> +
>> +/ {
>> + model = "Zynq MicroZED Development Board";
>> + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
>> +
>> + aliases {
>> + ethernet0 = &gem0;
>> + serial0 = &uart1;
>> + };
>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0x0 0x40000000>;
>> + };
>> +
>> + chosen {
>> + bootargs = "earlycon";
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + usb_phy0: phy0 {
>> + compatible = "usb-nop-xceiv";
>> + #phy-cells = <0>;
>> + };
>> +};
>> +
>> +&clkc {
>> + ps-clk-frequency = <33333333>;
>> +};
>> +
>> +&gem0 {
>> + status = "okay";
>> + phy-mode = "rgmii-id";
>> + phy-handle = <ðernet_phy>;
>> +
>> + ethernet_phy: ethernet-phy@0 {
>> + reg = <0>;
>> + };
>> +};
>> +
>> +&sdhci0 {
>> + status = "okay";
>> +};
>> +
>> +&uart1 {
>> + status = "okay";
>> +};
>> +
>> +&usb0 {
>> + status = "okay";
>> + dr_mode = "host";
>> + usb-phy = <&usb_phy0>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usb0_default>;
>> +};
>> +
>> +&pinctrl0 {
>> + pinctrl_usb0_default: usb0-default {
>> + mux {
>> + groups = "usb0_0_grp";
>> + function = "usb0";
>> + };
>> +
>> + conf {
>> + groups = "usb0_0_grp";
>> + slew-rate = <0>;
>> + io-standard = <1>;
>> + };
>> +
>> + conf-rx {
>> + pins = "MIO29", "MIO31", "MIO36";
>> + bias-high-impedance;
>> + };
>> +
>> + conf-tx {
>> + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
>> + "MIO35", "MIO37", "MIO38", "MIO39";
>> + bias-disable;
>> + };
>> + };
>> +};
>>
>
> Applied.
Was it missed? I couldn't see it on the source for a while. any help?
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
