The following patches adds a pinctrl driver for Broadcom Capri (BCM281xx) SoCs. The first patch, adding the void * to pinctrl_pin_desc, has been previously discussed with LinusW. See this thread: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/165880.html --- v3: Re-worked driver to be based on generic pinconfig, addressed review comments and other supporting changes: - moved config selection from Kconfig to defconfig - added slew-rate, input enable, input disable properties for generic pinconfig - added a description for PINCTRL config v2: Use hyphens instead of underscore in DT property names. Sherman Yin (6): pinctrl: Add void * to pinctrl_pin_desc pinctrl: Adds slew-rate, input-enable/disable pinctrl: Make PINCTRL selectable by defconfig/menuconfig pinctrl: Add pinctrl binding for Broadcom Capri SoCs ARM: pinctrl: Add Broadcom Capri pinctrl driver pinctrl: Enable pinctrl for Broadcom Capri SoCs .../bindings/pinctrl/brcm,capri-pinctrl.txt | 429 ++++++ .../bindings/pinctrl/pinctrl-bindings.txt | 3 + arch/arm/boot/dts/bcm11351.dtsi | 4 + arch/arm/configs/bcm_defconfig | 5 + drivers/pinctrl/Kconfig | 13 +- drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinconf-generic.c | 4 + drivers/pinctrl/pinctrl-capri.c | 1408 ++++++++++++++++++++ include/linux/pinctrl/pinconf-generic.h | 4 + include/linux/pinctrl/pinctrl.h | 2 + 10 files changed, 1872 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-capri.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
