On Thursday 01 Dec 2016 13:35:16 Tony Lindgren wrote: > * Tony Lindgren <tony@xxxxxxxxxxx> [161201 13:14]: > > * Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> [161130 09:58]: > > > The Beagleboard-xM has a LAN9514 USB hub and ethernet controller, > > > connected to port 2 of the OMAP EHCI controller. The board however has > > > no EEPROM to store the ethernet MAC address, which is programmed by the > > > boot loader. > > > > > > To allow Linux to use the same MAC address as the boot loader (or for > > > that matter any fixed MAC address), we need a node in the device tree > > > for the ethernet controller that the boot loader can update at runtime > > > with a local-mac-address property. Add it, along with an alias for the > > > ethernet controller to let the boot loader locate it easily. > > > > Does not seem to work here.. Do I need to set something in u-boot? > > I'm using U-Boot 2016.09-00004-g26bb688. > > Looks like my u-boot only has usbethaddr in the environment. After doing > setenv ethaddr it's now working :) Nice to know, thanks for the tip :-) -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
