Re: [PATCH v6 1/5] mmc: dt-bindings: add ZTE ZX296718 MMC bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Nov 30, 2016 at 7:34 PM, Jun Nie <jun.nie@xxxxxxxxxx> wrote:
> 2016-11-24 10:17 GMT+08:00 Jun Nie <jun.nie@xxxxxxxxxx>:
>> 2016-11-18 14:29 GMT+08:00 Jun Nie <jun.nie@xxxxxxxxxx>:
>>> Document the device-tree binding of ZTE MMC host on
>>> ZX296718 SoC.
>>>
>>> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
>>> ---
>>>  .../devicetree/bindings/mmc/zx-dw-mshc.txt         | 35 ++++++++++++++++++++++
>>>  1 file changed, 35 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
>>> new file mode 100644
>>> index 0000000..c175c4b
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
>>> @@ -0,0 +1,35 @@
>>> +* ZTE specific extensions to the Synopsys Designware Mobile Storage
>>> +  Host Controller
>>> +
>>> +The Synopsys designware mobile storage host controller is used to interface
>>> +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
>>> +differences between the core Synopsys dw mshc controller properties described
>>> +by synopsys-dw-mshc.txt and the properties used by the ZTE specific
>>> +extensions to the Synopsys Designware Mobile Storage Host Controller.
>>> +
>>> +Required Properties:
>>> +
>>> +* compatible: should be
>>> +       - "zte,zx296718-dw-mshc": for ZX SoCs
>>> +
>>> +Example:
>>> +
>>> +       mmc1: mmc@1110000 {
>>> +               compatible = "zte,zx296718-dw-mshc";
>>> +               #address-cells = <1>;
>>> +               #size-cells = <0>;
>>> +               reg = <0x01110000 0x1000>;
>>> +               interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
>>> +               fifo-depth = <32>;
>>> +               data-addr = <0x200>;
>>> +               fifo-watermark-aligned;
>>> +               bus-width = <4>;
>>> +               clock-frequency = <50000000>;
>>> +               clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
>>> +               clock-names = "biu", "ciu";
>>> +               num-slots = <1>;
>>> +               max-frequency = <50000000>;
>>> +               cap-sdio-irq;
>>> +               cap-sd-highspeed;
>>> +               status = "disabled";
>>> +       };
>>> --
>>> 1.9.1
>>>
>>
>> Hi Rob & Mark,
>>
>> Could you help review and act this patch if you think it is OK? Thank you!
>>
>> Jun
>
> Hi Rob & Mark,
>
> Could you help comment or act on this patch? Thank you!

Resend the patch to the DT list so patchwork will pick it up if you
want it reviewed.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux