Hi Laurent,
On 11/30/2016 04:56 PM, Laurent Pinchart wrote:
> Hi Neil,
>
> Thank you for the patch.
>
> On Wednesday 30 Nov 2016 16:43:44 Neil Armstrong wrote:
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>> ---
>> .../bindings/display/meson/meson-drm.txt | 101 ++++++++++++++++++
>> 1 file changed, 101 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/display/meson/meson-drm.txt
>>
>> diff --git a/Documentation/devicetree/bindings/display/meson/meson-drm.txt
>> b/Documentation/devicetree/bindings/display/meson/meson-drm.txt new file
>> mode 100644
>> index 0000000..e52869a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/meson/meson-drm.txt
>> @@ -0,0 +1,101 @@
[...]
>> +
>> +Device Tree Bindings:
>> +---------------------
>> +
>> +VPU: Video Processing Unit
>> +--------------------------
>> +
>> +Required properties:
>> +- compatible: value should be different for each SoC family as :
>> + - GXBB (S905) : "amlogic,meson-gxbb-vpu"
>> + - GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
>> + - GXM (S912) : "amlogic,meson-gxm-vpu"
>> + followed by the common "amlogic,meson-gx-vpu"
>> +- reg: base address and size of he following memory-mapped regions :
>> + - vpu
>> + - hhi
>> + - dmc
>> +- reg-names: should contain the names of the previous memory regions
>> +- interrupts: should contain the VENC Vsync interrupt number
>> +
>> +- ports: A ports node with endpoint definitions as defined in
>> + Documentation/devicetree/bindings/media/video-interfaces.txt.
>> + The first port should be connected to a CVBS connector endpoint if
>> available.
>
> This is a bit vague, I propose clarifying it with a description similar to the
> one in the renesas,du.txt bindings.
>
> Required nodes:
>
> The connections to the VPU output video ports are modeled using the OF graph
> bindings specified in Documentation/devicetree/bindings/graph.txt.
>
> The following table lists for each supported model the port number
> corresponding to each DU output.
>
> Port 0 Port1 Port2 Port3
> -----------------------------------------------------------------------------
> R8A7779 (H1) DPAD 0 DPAD 1 - -
> R8A7790 (H2) DPAD LVDS 0 LVDS 1 -
> R8A7791 (M2-W) DPAD LVDS 0 - -
> R8A7792 (V2H) DPAD 0 DPAD 1 - -
> R8A7793 (M2-N) DPAD LVDS 0 - -
> R8A7794 (E2) DPAD 0 DPAD 1 - -
> R8A7795 (H3) DPAD HDMI 0 HDMI 1 LVDS
> R8A7796 (M3-W) DPAD HDMI LVDS -
>
> (You should obviously replace the table with Amlogic data)
>
> It doesn't matter if the current driver implementation only supports CVBS, the
> DT bindings can already document the other ports.
>
Ok, it's a pretty table ! Will integrate this.
>> +
>> +Example:
>> +
>> +tv: connector {
>> + compatible = "composite-video-connector";
>> + label = "cvbs";
>
> I'd remove the label here, as it doesn't bring any additional information.
> Unless the board you're using has a label for the connector, in case that
> label should be used.
Indeed, I already removed it in the dts.
>
> Apart from that,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
[...]
Thanks for the review,
Neil
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
