On Tue, 29 Nov 2016 20:46:22 +0200 Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: [snip] > > +Example: > > + > > + hdmi: hdmi@01ee0000 { > > + compatible = "allwinner,sun8i-a83t-hdmi"; > > + reg = <0x01ee0000 0x20000>; > > + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI>, > > + <&ccu CLK_HDMI_DDC>; > > + clock-names = "bus", "clock", "ddc-clock"; > > + resets = <&ccu RST_HDMI0>, <&ccu RST_HDMI1>; > > + reset-names = "hdmi0", "hdmi1"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&hdmi_pins_a>; > > + status = "disabled"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + port@0 { /* video */ > > + reg = <0>; > > + hdmi_tcon1: endpoint { > > + remote-endpoint = <&tcon1_hdmi>; > > + }; > > + }; > > + port@1 { /* audio */ > > + reg = <1>; > > + hdmi_i2s2: endpoint { > > + remote-endpoint = <&i2s2_hdmi>; > > + }; > > + }; > > You need a third port for the HDMI encoder output, connected to an HDMI > connector DT node. I don't see what you mean. The HDMI device is both the encoder and connector (as the TDA998x): plane -> DE2 mixer ---> TCON -----> HDMI -----> display device ----- plane ------ - CRTC - - encoder \ connector -- (HDMI cable) audio-controller - - audio-codec / > > + }; -- Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html