From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Date: Fri, 25 Nov 2016 14:11:59 +0100 > The RTL8211F PHY driver currently enables the TX-delay only when the > phy-mode is PHY_INTERFACE_MODE_RGMII. This is incorrect, because there > are three RGMII variations of the phy-mode which explicitly request the > PHY to enable the RX and/or TX delay, while PHY_INTERFACE_MODE_RGMII > specifies that the PHY should disable the RX and/or TX delays. > > Additionally to the RTL8211F PHY driver change this contains a small > update to the phy-mode documentation to clarify the purpose of the > RGMII phy-modes. > While this may not be perfect yet it's at least a start. Please feel > free to drop this patch from this series and send an improved version > yourself. > > These patches are the results of recent discussions, see [0] > > [0] http://lists.infradead.org/pipermail/linux-amlogic/2016-November/001688.html Series applied, thanks Martin. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html