Re: [PATCHv2 00/10] Add memory mapped support for ti qspi, m25p80 serial flash.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tuesday, December 10, 2013 at 07:29:04 PM, Mark Brown wrote:
> On Tue, Dec 10, 2013 at 07:22:10PM +0100, Marek Vasut wrote:
> > On Tuesday, December 10, 2013 at 05:11:43 PM, Mark Brown wrote:
> > > There is some stuff that pushes up into the controller in that while
> > > the device is in memory mapped mode as far as I can tell it's not safe
> > > to do other accesses so if someone's put more than one device on the
> > > SPI bus we need to handle interactions there.
> > 
> > OK, so it's either-or . That seems OK, you might want to have two drivers
> > for this ip block, one to handle it as a SPI block and one to handle it
> > as a SPI-NOR block. ... that is of course, if these two modes can't work
> > together.
> 
> Or the client disables the memory map when it's not actively being used
> and the stops other transfers starting while the mapping is in place.
> I'd expect we'll have to cope with shared use at some point, hardware
> engineers will probably build such systems.

Aren't we fixing the problem at the wrong place ? Maybe it's about time to fix 
the engineers ;-)

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux