This adds the DT binding documentation for the USB2 and USB3 PHYs found in the Meson GXL and GXM SoCs. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- .../devicetree/bindings/phy/meson-gxl-usb2-phy.txt | 25 ++++++++++++++++++++ .../devicetree/bindings/phy/meson-gxl-usb3-phy.txt | 27 ++++++++++++++++++++++ 2 files changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt new file mode 100644 index 0000000..e7828ca --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt @@ -0,0 +1,25 @@ +* Amlogic Meson GXL and GXM USB2 PHY binding + +This describes the USB2 PHY block which provides multiple USB2 PHY ports. + +Required properties: +- compatible: Should be "amlogic,meson-gxl-usb2-phy" +- reg: The base address and length of the registers +- #phys-cells: should be 1 (see phy-bindings.txt in this directory) +- clocks: phandle and clock identifier for the phy clocks +- clock-names: "usb" and "usb_ddr" +- resets: reference to the reset controller + +Optional properties: +- phy-supply: see phy-bindings.txt in this directory + + +Example: + usb2_phys: phy@78000 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <1>; + reg = <0x0 0x78000 0x0 0x80>; + clocks = <&clkc CLKID_USB1>, <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "usb", "usb_ddr"; + resets = <&reset RESET_USB_OTG>; + }; diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt new file mode 100644 index 0000000..be779e8 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt @@ -0,0 +1,27 @@ +* Amlogic Meson GXL and GXM USB3 PHY binding + +Required properties: +- compatible: Should be "amlogic,meson-gxl-usb3-phy" +- reg: The base address and length of the registers +- #phys-cells: should be 0 (see phy-bindings.txt in this directory) +- interrupts: describes the OTG device/host mode detection interrupt +- phys: a list of related PHYs (typically the USB2 PHYs, see + meson-gxl-usb2-phy.txt in this directory). The mode of + the listed PHYs will be managed by the USB3 PHY (which + is required for OTG device/host detection to work). + The number of PHYs listed typically matches the number + of ports which are enabled in the USB controller which + uses this PHY. + +Optional properties: +- phy-supply: see phy-bindings.txt in this directory + + +Example: + usb3_phy0: phy@78080 { + compatible = "amlogic,meson-gxl-usb3-phy"; + #phy-cells = <0>; + reg = <0x0 0x78080 0x0 0x20>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phys 0>, <&usb2_phys 1>; + }; -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html