Sebastian Frias <sf84@xxxxxxxxxxx> writes: > On 24/11/16 19:55, Florian Fainelli wrote: >> Le 24/11/2016 à 09:05, Martin Blumenstingl a écrit : >>> Based on what I found it seems that rgmii-id, rgmii-txid and >>> rgmii-rxid are supposed to be handled by the PHY. >> >> Correct, the meaning of PHY_INTERFACE_MODE should be from the >> perspective of the PHY device: >> >> - PHY_INTERFACE_MODE_RGMII_TXID means that the PHY is responsible for >> adding a delay when the MAC transmits (TX MAC -> PHY (delay) -> wire) >> - PHY_INTERFACE_MODE_RGMII_RXID means that the PHY is responsible for >> adding a delay when the MAC receives (RX MAC <- (delay) PHY) <- wire) >> > > Thanks for the explanation. > Actually I had thought that the delay was to account for board routing > (wires) between the MAC and the PHY. > From your explanation it appears that the delay is to account for board > routing (wires) between the PHY and the RJ45 socket. The delay pertains to the RGMII link between MAC and PHY. The external connection is self-clocking. -- Måns Rullgård -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
