Signed-off-by: Peter Rosin <peda@xxxxxxxxxx> --- .../devicetree/bindings/pinctrl/pinctrl-sx150x.txt | 6 +- drivers/pinctrl/pinctrl-sx150x.c | 142 ++++++++++----------- 2 files changed, 74 insertions(+), 74 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt index 25b4ec80c759..83f8d5c449ba 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt @@ -6,11 +6,11 @@ pin controller, GPIO, and interrupt bindings. Required properties: - compatible: should be one of : + "semtech,sx1502q", + "semtech,sx1503q", "semtech,sx1506q", "semtech,sx1508q", - "semtech,sx1509q", - "semtech,sx1502q", - "semtech,sx1503q". + "semtech,sx1509q". - reg: The I2C slave address for this device. diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c index a19c814843aa..97df9302e84b 100644 --- a/drivers/pinctrl/pinctrl-sx150x.c +++ b/drivers/pinctrl/pinctrl-sx150x.c @@ -148,71 +148,6 @@ static const struct pinctrl_pin_desc sx150x_16_pins[] = { PINCTRL_PIN(16, "oscio"), }; -static const struct sx150x_device_data sx1508q_device_data = { - .model = SX150X_789, - .reg_pullup = 0x03, - .reg_pulldn = 0x04, - .reg_dir = 0x07, - .reg_data = 0x08, - .reg_irq_mask = 0x09, - .reg_irq_src = 0x0c, - .reg_sense = 0x0a, - .pri.x789 = { - .reg_drain = 0x05, - .reg_polarity = 0x06, - .reg_clock = 0x0f, - .reg_misc = 0x10, - .reg_reset = 0x7d, - }, - .ngpios = 8, - .pins = sx150x_8_pins, - .npins = ARRAY_SIZE(sx150x_8_pins), -}; - -static const struct sx150x_device_data sx1509q_device_data = { - .model = SX150X_789, - .reg_pullup = 0x06, - .reg_pulldn = 0x08, - .reg_dir = 0x0e, - .reg_data = 0x10, - .reg_irq_mask = 0x12, - .reg_irq_src = 0x18, - .reg_sense = 0x14, - .pri.x789 = { - .reg_drain = 0x0a, - .reg_polarity = 0x0c, - .reg_clock = 0x1e, - .reg_misc = 0x1f, - .reg_reset = 0x7d, - }, - .ngpios = 16, - .pins = sx150x_16_pins, - .npins = ARRAY_SIZE(sx150x_16_pins), -}; - -static const struct sx150x_device_data sx1506q_device_data = { - .model = SX150X_456, - .reg_pullup = 0x04, - .reg_pulldn = 0x06, - .reg_dir = 0x02, - .reg_data = 0x00, - .reg_irq_mask = 0x08, - .reg_irq_src = 0x0e, - .reg_sense = 0x0a, - .pri.x456 = { - .reg_pld_mode = 0x20, - .reg_pld_table0 = 0x22, - .reg_pld_table1 = 0x24, - .reg_pld_table2 = 0x26, - .reg_pld_table3 = 0x28, - .reg_pld_table4 = 0x2a, - .reg_advance = 0xad, - }, - .ngpios = 16, - .pins = sx150x_16_pins, - .npins = 16, /* oscio not available */ -}; - static const struct sx150x_device_data sx1502q_device_data = { .model = SX150X_123, .reg_pullup = 0x02, @@ -259,6 +194,71 @@ static const struct sx150x_device_data sx1503q_device_data = { .npins = 16, /* oscio not available */ }; +static const struct sx150x_device_data sx1506q_device_data = { + .model = SX150X_456, + .reg_pullup = 0x04, + .reg_pulldn = 0x06, + .reg_dir = 0x02, + .reg_data = 0x00, + .reg_irq_mask = 0x08, + .reg_irq_src = 0x0e, + .reg_sense = 0x0a, + .pri.x456 = { + .reg_pld_mode = 0x20, + .reg_pld_table0 = 0x22, + .reg_pld_table1 = 0x24, + .reg_pld_table2 = 0x26, + .reg_pld_table3 = 0x28, + .reg_pld_table4 = 0x2a, + .reg_advance = 0xad, + }, + .ngpios = 16, + .pins = sx150x_16_pins, + .npins = 16, /* oscio not available */ +}; + +static const struct sx150x_device_data sx1508q_device_data = { + .model = SX150X_789, + .reg_pullup = 0x03, + .reg_pulldn = 0x04, + .reg_dir = 0x07, + .reg_data = 0x08, + .reg_irq_mask = 0x09, + .reg_irq_src = 0x0c, + .reg_sense = 0x0a, + .pri.x789 = { + .reg_drain = 0x05, + .reg_polarity = 0x06, + .reg_clock = 0x0f, + .reg_misc = 0x10, + .reg_reset = 0x7d, + }, + .ngpios = 8, + .pins = sx150x_8_pins, + .npins = ARRAY_SIZE(sx150x_8_pins), +}; + +static const struct sx150x_device_data sx1509q_device_data = { + .model = SX150X_789, + .reg_pullup = 0x06, + .reg_pulldn = 0x08, + .reg_dir = 0x0e, + .reg_data = 0x10, + .reg_irq_mask = 0x12, + .reg_irq_src = 0x18, + .reg_sense = 0x14, + .pri.x789 = { + .reg_drain = 0x0a, + .reg_polarity = 0x0c, + .reg_clock = 0x1e, + .reg_misc = 0x1f, + .reg_reset = 0x7d, + }, + .ngpios = 16, + .pins = sx150x_16_pins, + .npins = ARRAY_SIZE(sx150x_16_pins), +}; + static int sx150x_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) { return 0; @@ -758,20 +758,20 @@ static const struct pinconf_ops sx150x_pinconf_ops = { }; static const struct i2c_device_id sx150x_id[] = { - {"sx1508q", (kernel_ulong_t) &sx1508q_device_data }, - {"sx1509q", (kernel_ulong_t) &sx1509q_device_data }, - {"sx1506q", (kernel_ulong_t) &sx1506q_device_data }, {"sx1502q", (kernel_ulong_t) &sx1502q_device_data }, {"sx1503q", (kernel_ulong_t) &sx1503q_device_data }, + {"sx1506q", (kernel_ulong_t) &sx1506q_device_data }, + {"sx1508q", (kernel_ulong_t) &sx1508q_device_data }, + {"sx1509q", (kernel_ulong_t) &sx1509q_device_data }, {} }; static const struct of_device_id sx150x_of_match[] = { - { .compatible = "semtech,sx1508q", .data = &sx1508q_device_data }, - { .compatible = "semtech,sx1509q", .data = &sx1509q_device_data }, - { .compatible = "semtech,sx1506q", .data = &sx1506q_device_data }, { .compatible = "semtech,sx1502q", .data = &sx1502q_device_data }, { .compatible = "semtech,sx1503q", .data = &sx1503q_device_data }, + { .compatible = "semtech,sx1506q", .data = &sx1506q_device_data }, + { .compatible = "semtech,sx1508q", .data = &sx1508q_device_data }, + { .compatible = "semtech,sx1509q", .data = &sx1509q_device_data }, {}, }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html