SCPI and SRAM are identical on GXBB and GXL. Moving the corresponding
nodes to meson-gx adds support for the thermal sensor on GXL based
devices.
While here, also rename the second compatible string because
"arm,legacy-scpi" was replaced by "arm,scpi-pre-1.0".
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 45 +++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 57 -----------------------------
2 files changed, 45 insertions(+), 57 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index fc033c0..47ab306 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -65,6 +65,7 @@
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu1: cpu@1 {
@@ -73,6 +74,7 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu2: cpu@2 {
@@ -81,6 +83,7 @@
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
cpu3: cpu@3 {
@@ -89,6 +92,7 @@
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&scpi_dvfs 0>;
};
l2: l2-cache0 {
@@ -153,6 +157,28 @@
};
};
+ scpi {
+ compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+ mboxes = <&mailbox 1 &mailbox 2>;
+ shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>;
+ clock-output-names = "vcpu";
+ };
+ };
+
+ scpi_sensors: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -264,6 +290,25 @@
#address-cells = <0>;
};
+ sram: sram@c8000000 {
+ compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+ reg = <0x0 0xc8000000 0x0 0x14000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0xc8000000 0x14000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "amlogic,meson-gxbb-scp-shmem";
+ reg = <0x13000 0x400>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "amlogic,meson-gxbb-scp-shmem";
+ reg = <0x13400 0x400>;
+ };
+ };
+
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index ac5ad3b..76465e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -50,28 +50,6 @@
/ {
compatible = "amlogic,meson-gxbb";
- scpi {
- compatible = "amlogic,meson-gxbb-scpi";
- mboxes = <&mailbox 1 &mailbox 2>;
- shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
- clocks {
- compatible = "arm,scpi-clocks";
-
- scpi_dvfs: scpi_clocks@0 {
- compatible = "arm,scpi-dvfs-clocks";
- #clock-cells = <1>;
- clock-indices = <0>;
- clock-output-names = "vcpu";
- };
- };
-
- scpi_sensors: sensors {
- compatible = "arm,scpi-sensors";
- #thermal-sensor-cells = <1>;
- };
- };
-
soc {
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
@@ -93,25 +71,6 @@
status = "disabled";
};
- sram: sram@c8000000 {
- compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
- reg = <0x0 0xc8000000 0x0 0x14000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0xc8000000 0x14000>;
-
- cpu_scp_lpri: scp-shmem@0 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
- reg = <0x13000 0x400>;
- };
-
- cpu_scp_hpri: scp-shmem@200 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
- reg = <0x13400 0x400>;
- };
- };
-
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
@@ -138,22 +97,6 @@
};
};
-&cpu0 {
- clocks = <&scpi_dvfs 0>;
-};
-
-&cpu1 {
- clocks = <&scpi_dvfs 0>;
-};
-
-&cpu2 {
- clocks = <&scpi_dvfs 0>;
-};
-
-&cpu3 {
- clocks = <&scpi_dvfs 0>;
-};
-
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
