Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> --- .../devicetree/bindings/reset/hisilicon,hi6220-reset.txt | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt index c25da39..6a864f3 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt @@ -9,10 +9,9 @@ hi6220 SoC. Required properties: - compatible: should be one of the following: - - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller. - - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller. -- reg: should be register base and length as documented in the - datasheet + - "hisilicon,hi6220-reset-sysctrl" : For peripheral reset controller. + - "hisilicon,hi6220-reset-mediactrl" : For media reset controller. +- hisi,rst-syscon: phandle of the reset's syscon. - #reset-cells: 1, see below Example: @@ -20,7 +19,12 @@ sys_ctrl: sys_ctrl@f7030000 { compatible = "hisilicon,hi6220-sysctrl", "syscon"; reg = <0x0 0xf7030000 0x0 0x2000>; #clock-cells = <1>; +}; + +sys_ctrl_rst: sys_rst_controller { + compatible = "hisilicon,hi6220-reset-sysctrl"; #reset-cells = <1>; + hisi,rst-syscon = <&sys_ctrl>; }; Specifying reset lines connected to IP modules @@ -29,7 +33,7 @@ example: uart1: serial@..... { ... - resets = <&sys_ctrl PERIPH_RSTEN3_UART1>; + resets = <&sys_ctrl_rst PERIPH_RSTEN3_UART1>; ... }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html