On Sun, Nov 20, 2016 at 10:56:23AM +0100, Jean-Francois Moine wrote:
> This patch adds a HDMI video driver to the Allwinner's SoCs A83T and H3.
>
> Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx>
> ---
> .../devicetree/bindings/display/sunxi/hdmi.txt | 53 ++
> drivers/gpu/drm/sun8i/Kconfig | 7 +
> drivers/gpu/drm/sun8i/Makefile | 2 +
> drivers/gpu/drm/sun8i/de2_hdmi.c | 394 ++++++++++
> drivers/gpu/drm/sun8i/de2_hdmi.h | 51 ++
> drivers/gpu/drm/sun8i/de2_hdmi_io.c | 839 +++++++++++++++++++++
> 6 files changed, 1346 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/sunxi/hdmi.txt
> create mode 100644 drivers/gpu/drm/sun8i/de2_hdmi.c
> create mode 100644 drivers/gpu/drm/sun8i/de2_hdmi.h
> create mode 100644 drivers/gpu/drm/sun8i/de2_hdmi_io.c
>
> diff --git a/Documentation/devicetree/bindings/display/sunxi/hdmi.txt b/Documentation/devicetree/bindings/display/sunxi/hdmi.txt
> new file mode 100644
> index 0000000..85709ab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/sunxi/hdmi.txt
> @@ -0,0 +1,53 @@
> +Allwinner HDMI Transmitter
> +==========================
> +
> +The Allwinner HDMI transmitters are included in the SoCs.
> +They support audio and video.
> +
> +Required properties:
> + - #address-cells : should be <1>
> + - #size-cells : should be <0>
> + - compatible : should be one of
> + "allwinner,sun8i-a83t-hdmi"
> + "allwinner,sun8i-h3-hdmi"
> + - clocks : phandles to the HDMI clocks as described in
> + Documentation/devicetree/bindings/clock/clock-bindings.txt
> + - clock-names : must be
> + "gate" : bus gate
> + "clock" : streaming clock
> + "ddc-clock" : DDC clock
> + - resets : One or two phandles to the HDMI resets
> + - reset-names : when 2 phandles, must be
> + "hdmi0" and "hdmi1"
> +
> +Required nodes:
> + - port: Audio and video input port nodes with endpoint definitions
> + as defined in Documentation/devicetree/bindings/graph.txt.
> + port@0 is video and port@1 is audio.
This should probably also have an output port to the hdmi-connector
binding. It is not needed so much if this block handles DDC and HPD
itself, but if those are a separate I2C controller and GPIO,
respectively, then you need it for sure. There's also power on the
connector or other connectors like muxed on Type-C.
> +
> +Example:
> +
> + hdmi: hdmi@01ee0000 {
> + compatible = "allwinner,sun8i-a83t-hdmi";
> + reg = <0x01ee0000 0x20000>;
> + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI>,
> + <&ccu CLK_HDMI_DDC>;
> + clock-names = "gate", "clock", "ddc-clock";
> + resets = <&ccu RST_HDMI0>, <&ccu RST_HDMI1>;
> + reset-names = "hdmi0", "hdmi1";
> + ...
Please show all properties in example.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 { /* video */
> + reg = <0>;
> + hdmi_lcd1: endpoint {
> + remote-endpoint = <&lcd1_hdmi>;
> + };
> + };
> + port@1 { /* audio */
> + reg = <1>;
> + hdmi_i2s2: endpoint {
> + remote-endpoint = <&i2s2_hdmi>;
> + };
> + };
> + };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
