On Mon, 21 Nov 2016, Lee Jones wrote:
> On Thu, 17 Nov 2016, Venkat Reddy Talla wrote:
>
> > Adding support to configure regulator POK mapping bit
> > to control nRST_IO and GPIO1 POK function.
> > In tegra based platform which uses MAX20024 pmic, when
> > some of regulators are configured FPS_NONE(flexible power sequencer)
> > causes PMIC GPIO1 to go low which lead to various other rails turning off,
> > to avoid this MPOK bit of those regulators need to be set to 0
> > so that PMIC GPIO1 will not go low.
> >
> > Signed-off-by: Venkat Reddy Talla <vreddytalla@xxxxxxxxxx>
> >
> > ---
> > changes in v2:
> > - updated commit message for the patch
> > - address review comments
> > ---
> > drivers/regulator/max77620-regulator.c | 46 ++++++++++++++++++++++++++++++++++
> > include/linux/mfd/max77620.h | 2 ++
>
> For my own reference:
> Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>
Mark if you want to take this patch, feel free.
> > 2 files changed, 48 insertions(+)
> >
> > diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
> > index a1b49a6..850b14c 100644
> > --- a/drivers/regulator/max77620-regulator.c
> > +++ b/drivers/regulator/max77620-regulator.c
> > @@ -81,6 +81,7 @@ struct max77620_regulator_pdata {
> > int suspend_fps_pd_slot;
> > int suspend_fps_pu_slot;
> > int current_mode;
> > + int power_ok;
> > int ramp_rate_setting;
> > };
> >
> > @@ -351,11 +352,48 @@ static int max77620_set_slew_rate(struct max77620_regulator *pmic, int id,
> > return 0;
> > }
> >
> > +static int max77620_config_power_ok(struct max77620_regulator *pmic, int id)
> > +{
> > + struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
> > + struct max77620_regulator_info *rinfo = pmic->rinfo[id];
> > + struct max77620_chip *chip = dev_get_drvdata(pmic->dev->parent);
> > + u8 val, mask;
> > + int ret;
> > +
> > + switch (chip->chip_id) {
> > + case MAX20024:
> > + if (rpdata->power_ok >= 0) {
> > + if (rinfo->type == MAX77620_REGULATOR_TYPE_SD)
> > + mask = MAX20024_SD_CFG1_MPOK_MASK;
> > + else
> > + mask = MAX20024_LDO_CFG2_MPOK_MASK;
> > +
> > + val = rpdata->power_ok ? mask : 0;
> > +
> > + ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr,
> > + mask, val);
> > + if (ret < 0) {
> > + dev_err(pmic->dev, "Reg 0x%02x update failed %d\n",
> > + rinfo->cfg_addr, ret);
> > + return ret;
> > + }
> > + }
> > + break;
> > +
> > + default:
> > + break;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int max77620_init_pmic(struct max77620_regulator *pmic, int id)
> > {
> > struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
> > int ret;
> >
> > + max77620_config_power_ok(pmic, id);
> > +
> > /* Update power mode */
> > ret = max77620_regulator_get_power_mode(pmic, id);
> > if (ret < 0)
> > @@ -595,6 +633,12 @@ static int max77620_of_parse_cb(struct device_node *np,
> > np, "maxim,suspend-fps-power-down-slot", &pval);
> > rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1;
> >
> > + ret = of_property_read_u32(np, "maxim,power-ok-control", &pval);
> > + if (!ret)
> > + rpdata->power_ok = pval;
> > + else
> > + rpdata->power_ok = -1;
> > +
> > ret = of_property_read_u32(np, "maxim,ramp-rate-setting", &pval);
> > rpdata->ramp_rate_setting = (!ret) ? pval : 0;
> >
> > @@ -807,6 +851,8 @@ static int max77620_regulator_resume(struct device *dev)
> > for (id = 0; id < MAX77620_NUM_REGS; id++) {
> > reg_pdata = &pmic->reg_pdata[id];
> >
> > + max77620_config_power_ok(pmic, id);
> > +
> > max77620_regulator_set_fps_slots(pmic, id, false);
> > if (reg_pdata->active_fps_src < 0)
> > continue;
> > diff --git a/include/linux/mfd/max77620.h b/include/linux/mfd/max77620.h
> > index 3ca0af07..ad2a9a8 100644
> > --- a/include/linux/mfd/max77620.h
> > +++ b/include/linux/mfd/max77620.h
> > @@ -180,6 +180,7 @@
> > #define MAX77620_SD_CFG1_FPWM_SD_MASK BIT(2)
> > #define MAX77620_SD_CFG1_FPWM_SD_SKIP 0
> > #define MAX77620_SD_CFG1_FPWM_SD_FPWM BIT(2)
> > +#define MAX20024_SD_CFG1_MPOK_MASK BIT(1)
> > #define MAX77620_SD_CFG1_FSRADE_SD_MASK BIT(0)
> > #define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0
> > #define MAX77620_SD_CFG1_FSRADE_SD_ENABLE BIT(0)
> > @@ -187,6 +188,7 @@
> > /* LDO_CNFG2 */
> > #define MAX77620_LDO_POWER_MODE_MASK 0xC0
> > #define MAX77620_LDO_POWER_MODE_SHIFT 6
> > +#define MAX20024_LDO_CFG2_MPOK_MASK BIT(2)
> > #define MAX77620_LDO_CFG2_ADE_MASK BIT(1)
> > #define MAX77620_LDO_CFG2_ADE_DISABLE 0
> > #define MAX77620_LDO_CFG2_ADE_ENABLE BIT(1)
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
