Changes the limited buswith to 8 bytes,and add the test in sun6i_dma_config function Accroding to sun6i dma driver, i think ,if the client doesn't configure the address width with dmaengine_slave_config function, it would use the default width. So we can add the test in sun6i_dma_config function called by dmaengine_slave_config, and test the configuration whether is support for the device. Signed-off-by: Hao Zhang <hao5781286@xxxxxxxxx> --- drivers/dma/sun6i-dma.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c index a235878..f7c90b6 100644 --- a/drivers/dma/sun6i-dma.c +++ b/drivers/dma/sun6i-dma.c @@ -250,7 +250,7 @@ static inline s8 convert_burst(u32 maxburst) static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width) { if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) || - (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES)) + (addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES)) return -EINVAL; return addr_width >> 1; @@ -758,6 +758,18 @@ static int sun6i_dma_config(struct dma_chan *chan, { struct sun6i_vchan *vchan = to_sun6i_vchan(chan); + if ((BIT(config->src_addr_width) | chan->device->src_addr_widths) != + chan->device->src_addr_widths) { + dev_err(chan2dev(chan), "Invalid DMA configuration\n"); + return -EINVAL; + } + + if ((BIT(config->dst_addr_width) | chan->device->dst_addr_widths) != + chan->device->dst_addr_widths) { + dev_err(chan2dev(chan), "Invalid DMA configuration\n"); + return -EINVAL; + } + memcpy(&vchan->cfg, config, sizeof(*config)); return 0; @@ -1028,11 +1040,23 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = { .nr_max_vchans = 34, }; +/* + * The A64 has 8 physical channels, a maximum DRQ port id of 27, + * and a total of 38 usable source and destination endpoints. + */ + +static struct sun6i_dma_config sun50i_a64_dma_cfg = { + .nr_max_channels = 8, + .nr_max_requests = 27, + .nr_max_vchans = 38, +}; + static const struct of_device_id sun6i_dma_match[] = { { .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg }, { .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg }, { .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg }, { .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg }, + { .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sun6i_dma_match); @@ -1112,6 +1136,13 @@ static int sun6i_dma_probe(struct platform_device *pdev) BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); sdc->slave.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + + if (of_device_is_compatible(pdev->dev.of_node, + "allwinner,sun50i-a64-dma")) { + sdc->slave.src_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES); + sdc->slave.dst_addr_widths |= BIT(DMA_SLAVE_BUSWIDTH_8_BYTES); + } + sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; sdc->slave.dev = &pdev->dev; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html