- Factor out _master() parts of code to separate functions. - Standardize all code relatated to I2C master. Signed-off-by: Luis Oliveira <lolivei@xxxxxxxxxxxx> --- Changes V2->V3: (Andy Shevchenko) - indentation and style fix - nothing else was changed in this patch from v2 drivers/i2c/busses/i2c-designware-core.c | 66 +++++++++++++++++++---------- drivers/i2c/busses/i2c-designware-platdrv.c | 36 ++++++++++------ 2 files changed, 66 insertions(+), 36 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 11e866d..22f79fa 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -87,13 +87,13 @@ #define DW_IC_INTR_GEN_CALL 0x800 #define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ - DW_IC_INTR_TX_EMPTY | \ DW_IC_INTR_TX_ABRT | \ DW_IC_INTR_STOP_DET) - +#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_TX_EMPTY) #define DW_IC_STATUS_ACTIVITY 0x1 #define DW_IC_STATUS_TFE BIT(2) -#define DW_IC_STATUS_MST_ACTIVITY BIT(5) +#define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) #define DW_IC_SDA_HOLD_RX_SHIFT 16 #define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT) @@ -204,6 +204,17 @@ static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) } } +static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) +{ + /* Configure Tx/Rx FIFO threshold levels */ + dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL); + dw_writel(dev, 0, DW_IC_RX_TL); + + /* configure the i2c master */ + dw_writel(dev, dev->master_cfg, DW_IC_CON); + dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK); +} + static u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) { @@ -320,10 +331,10 @@ static void i2c_dw_release_lock(struct dw_i2c_dev *dev) } /** - * i2c_dw_init() - initialize the designware i2c master hardware + * i2c_dw_init() - initialize the designware i2c hardware * @dev: device private data * - * This functions configures and enables the I2C master. + * This functions configures and enables the I2C. * This function is called during I2C init function, and in case of timeout at * run time. */ @@ -442,12 +453,9 @@ int i2c_dw_init(struct dw_i2c_dev *dev) "Hardware too old to adjust SDA hold time.\n"); } - /* Configure Tx/Rx FIFO threshold levels */ - dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL); - dw_writel(dev, 0, DW_IC_RX_TL); - - /* configure the i2c master */ - dw_writel(dev, dev->master_cfg , DW_IC_CON); + if ((dev->master_cfg & DW_IC_CON_MASTER) && + (dev->master_cfg & DW_IC_CON_SLAVE_DISABLE)) + i2c_dw_configure_fifo_master(dev); i2c_dw_release_lock(dev); @@ -491,7 +499,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) */ ic_status = dw_readl(dev, DW_IC_STATUS); if (!dev->dynamic_tar_update_enabled || - (ic_status & DW_IC_STATUS_MST_ACTIVITY) || + (ic_status & DW_IC_STATUS_MASTER_ACTIVITY) || !(ic_status & DW_IC_STATUS_TFE)) { __i2c_dw_enable_and_wait(dev, false); enabled = false; @@ -531,7 +539,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) /* Clear and enable interrupts */ dw_readl(dev, DW_IC_CLR_INTR); - dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK); + dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK); } /* @@ -551,7 +559,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) u8 *buf = dev->tx_buf; bool need_restart = false; - intr_mask = DW_IC_INTR_DEFAULT_MASK; + intr_mask = DW_IC_INTR_MASTER_MASK; for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) { /* @@ -850,16 +858,9 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) * Interrupt service routine. This gets called whenever an I2C interrupt * occurs. */ -static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) +static bool i2c_dw_irq_handler_master(struct dw_i2c_dev *dev) { - struct dw_i2c_dev *dev = dev_id; - u32 stat, enabled; - - enabled = dw_readl(dev, DW_IC_ENABLE); - stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); - dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__, enabled, stat); - if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) - return IRQ_NONE; + u32 stat; stat = i2c_dw_read_clear_intrbits(dev); @@ -906,7 +907,26 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) i2c_dw_disable_int(dev); dw_writel(dev, stat, DW_IC_INTR_MASK); } + return true; +} + +static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) +{ + struct dw_i2c_dev *dev = dev_id; + u32 stat, enabled, mode; + + enabled = dw_readl(dev, DW_IC_ENABLE); + mode = dw_readl(dev, DW_IC_CON); + stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); + + dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__, enabled, stat); + if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) + return IRQ_NONE; + + if (i2c_dw_irq_handler_master(dev)) + return IRQ_HANDLED; + complete(&dev->cmd_complete); return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 0b42a12..f4e28ac 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -138,6 +138,28 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev) } #endif +static void i2c_dw_configure_master(struct platform_device *pdev) +{ + struct dw_i2c_dev *dev = platform_get_drvdata(pdev); + + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN; + + dev->functionality |= I2C_FUNC_10BIT_ADDR; + dev_info(&pdev->dev, "I am registed as a I2C Master!\n"); + + switch (dev->clk_freq) { + case 100000: + dev->master_cfg |= DW_IC_CON_SPEED_STD; + break; + case 3400000: + dev->master_cfg |= DW_IC_CON_SPEED_HIGH; + break; + default: + dev->master_cfg |= DW_IC_CON_SPEED_FAST; + } +} + static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) { if (IS_ERR(i_dev->clk)) @@ -222,19 +244,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK; - dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | - DW_IC_CON_RESTART_EN; - - switch (dev->clk_freq) { - case 100000: - dev->master_cfg |= DW_IC_CON_SPEED_STD; - break; - case 3400000: - dev->master_cfg |= DW_IC_CON_SPEED_HIGH; - break; - default: - dev->master_cfg |= DW_IC_CON_SPEED_FAST; - } + i2c_dw_configure_master(pdev); dev->clk = devm_clk_get(&pdev->dev, NULL); if (!i2c_dw_plat_prepare_clk(dev, true)) { -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html