On 11/15/2016 10:31 PM, Noam Camus wrote: > From: Noam Camus <noamca@xxxxxxxxxxxx> > > Change log > --- > V6 --> V7 > Apply several comments made by Daniel Lezcano: > 1) Remove CLOCK_EVT_FEAT_PERIODIC support. This way it is > pure oneshot driver. This simplifies driver so that: > nps_clkevent_add_thread() > nps_clkevent_rm_thread() > are more clearer without any vague logic if to change > TSI bit of current HW thread or not. > 2) tick_resume is also calls nps_clkevent_rm_thread() > 3) Few (hopefully last) typo fixes. > > V5 --> V6 > Apply several comments made by Daniel Lezcano: > 1) nps_get_timer_clk() - use clk_put() on error scenario > 2) nps_get_timer_clk() - return EINVAL and not plain 1 > 3) Fix typos in log (double checked with spell checker) > > V4 --> V5 > Apply several comments made by Daniel Lezcano: > 1) Add __init attribute to nps_get_timer_clk() > 2) Fix return value of nps_get_timer_clk() > when failing to get clk rate > 3) Change clocksource rate from 301 -> 300 > > V3 --> V4 > Main changes are [Thanks for the review]: > Fix many typos at log [Daniel] > Add handling for bad return values [Daniel and Thomas] > Replace use of internal irqchip pointers with existing IRQ API [Thomas] > Provide interrupt handler (percpu) with dev_id equal to evt [Thomas] > Fix passing *clk by reference to nps_get_timer_clk() [Daniel] > > V2 --> V3 > Apply Rob Herring comment about backword compatibility > > V1 --> V2 > Apply Daniel Lezcano comments: > CLOCKSOURCE_OF_DECLARE return value > update hotplug callbacks usage > squash of 2 first commits. > In this version I created new commit to serve as preperation for adding clockevents. > This way the last patch is more readable with clockevent content. > --- > > In first version of this driver we supported clocksource for the NPS400. > The support for clockevent was taken from Synopsys ARC timer driver. > This was good for working with our simulator of NPS400. > However in NPS400 ASIC the timers behave differently than simulation. > The timers in ASIC are shared between all threads whithin a core > and hence need different driver to support this behaviour. > > The idea of this design is that we got 16 HW threads per core > each represented at bimask in a shared register in this core. > So when thread wants that next clockevent expiration will produce > timer interrupt to itself the correspondance bit in this register > should be set. > So theoretically if all 16 bits are set then all HW threads will get > timer interrupt on next expiration of timer 0. > > Note that we use Synopsys ARC design naming convention for the timers > where: > timer0 is used for clockevents > timer1 is used for clocksource. > > Noam Camus (3): > soc: Support for NPS HW scheduling > clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer > clocksource: Add clockevent support to NPS400 driver > > .../bindings/timer/ezchip,nps400-timer.txt | 15 -- > .../bindings/timer/ezchip,nps400-timer0.txt | 17 ++ > .../bindings/timer/ezchip,nps400-timer1.txt | 15 ++ > arch/arc/plat-eznps/include/plat/ctop.h | 2 - > drivers/clocksource/timer-nps.c | 223 ++++++++++++++++++-- > include/soc/nps/mtm.h | 59 +++++ > 6 files changed, 294 insertions(+), 37 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt > create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt > create mode 100644 Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt > create mode 100644 include/soc/nps/mtm.h Added to ARC for-next ! Thx, -Vineet -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html