From: Tamizh chelvam <c_traja@xxxxxxxxxxxxxxxx>
This patch add support to enable or disable btcoex via nl80211.
The firmware support this feature since 10.2.4.54 on 2G-only board,
dual band or 5G boards don't support this. WMI service
WMI_SERVICE_COEX_GPIO is used to identify the firmware support of this
feature.
Signed-off-by: Tamizh chelvam <c_traja@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/debug.c | 37 ++------------------
drivers/net/wireless/ath/ath10k/mac.c | 58 +++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/mac.h | 1 +
3 files changed, 62 insertions(+), 34 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 82a4c67..ea30fbe 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -26,6 +26,7 @@
#include "debug.h"
#include "hif.h"
#include "wmi-ops.h"
+#include "mac.h"
/* ms */
#define ATH10K_DEBUG_HTT_STATS_INTERVAL 1000
@@ -2138,7 +2139,6 @@ static ssize_t ath10k_write_btcoex(struct file *file,
size_t buf_size;
int ret;
bool val;
- u32 pdev_param;
buf_size = min(count, (sizeof(buf) - 1));
if (copy_from_user(buf, ubuf, buf_size))
@@ -2150,40 +2150,9 @@ static ssize_t ath10k_write_btcoex(struct file *file,
return -EINVAL;
mutex_lock(&ar->conf_mutex);
-
- if (ar->state != ATH10K_STATE_ON &&
- ar->state != ATH10K_STATE_RESTARTED) {
- ret = -ENETDOWN;
- goto exit;
- }
-
- if (!(test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags) ^ val)) {
+ ret = ath10k_mac_set_btcoex(ar, val);
+ if (!ret)
ret = count;
- goto exit;
- }
-
- pdev_param = ar->wmi.pdev_param->enable_btcoex;
- if (test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
- ar->running_fw->fw_file.fw_features)) {
- ret = ath10k_wmi_pdev_set_param(ar, pdev_param, val);
- if (ret) {
- ath10k_warn(ar, "failed to enable btcoex: %d\n", ret);
- ret = count;
- goto exit;
- }
- } else {
- ath10k_info(ar, "restarting firmware due to btcoex change");
- queue_work(ar->workqueue, &ar->restart_work);
- }
-
- if (val)
- set_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
- else
- clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
-
- ret = count;
-
-exit:
mutex_unlock(&ar->conf_mutex);
return ret;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 717b2fa..e7131b9 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7445,6 +7445,63 @@ struct ath10k_mac_change_chanctx_arg {
return 0;
}
+static inline void ath10k_mac_update_btcoex_flag(struct ath10k *ar, bool val)
+{
+ if (val)
+ set_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
+ else
+ clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
+}
+
+int ath10k_mac_set_btcoex(struct ath10k *ar, bool val)
+{
+ u32 pdev_param;
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (ar->state != ATH10K_STATE_ON &&
+ ar->state != ATH10K_STATE_RESTARTED)
+ return -ENETDOWN;
+
+ if (!(test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags) ^ val))
+ return 0;
+
+ pdev_param = ar->wmi.pdev_param->enable_btcoex;
+ if (test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM,
+ ar->running_fw->fw_file.fw_features)) {
+ ret = ath10k_wmi_pdev_set_param(ar, pdev_param, val);
+
+ if (ret) {
+ ath10k_warn(ar,
+ "failed to modify btcoex state: %d\n", ret);
+ return ret;
+ }
+ ath10k_mac_update_btcoex_flag(ar, val);
+ } else {
+ ath10k_info(ar, "restarting firmware due to btcoex change");
+ ath10k_mac_update_btcoex_flag(ar, val);
+ queue_work(ar->workqueue, &ar->restart_work);
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_op_set_btcoex(struct ieee80211_hw *hw, bool enabled)
+{
+ int ret;
+ struct ath10k *ar = hw->priv;
+
+ if (!test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map))
+ return -EOPNOTSUPP;
+
+ mutex_lock(&ar->conf_mutex);
+ ret = ath10k_mac_set_btcoex(ar, enabled);
+ mutex_unlock(&ar->conf_mutex);
+
+ return ret;
+}
+
static const struct ieee80211_ops ath10k_ops = {
.tx = ath10k_mac_op_tx,
.wake_tx_queue = ath10k_mac_op_wake_tx_queue,
@@ -7486,6 +7543,7 @@ struct ath10k_mac_change_chanctx_arg {
.assign_vif_chanctx = ath10k_mac_op_assign_vif_chanctx,
.unassign_vif_chanctx = ath10k_mac_op_unassign_vif_chanctx,
.switch_vif_chanctx = ath10k_mac_op_switch_vif_chanctx,
+ .set_btcoex = ath10k_mac_op_set_btcoex,
CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
diff --git a/drivers/net/wireless/ath/ath10k/mac.h b/drivers/net/wireless/ath/ath10k/mac.h
index 1bd29ec..de1fa72 100644
--- a/drivers/net/wireless/ath/ath10k/mac.h
+++ b/drivers/net/wireless/ath/ath10k/mac.h
@@ -82,6 +82,7 @@ struct ieee80211_txq *ath10k_mac_txq_lookup(struct ath10k *ar,
u16 peer_id,
u8 tid);
int ath10k_mac_ext_resource_config(struct ath10k *ar, u32 val);
+int ath10k_mac_set_btcoex(struct ath10k *ar, bool val);
static inline struct ath10k_vif *ath10k_vif_to_arvif(struct ieee80211_vif *vif)
{
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
