Hi Rob, On Monday 14 November 2016 09:45 PM, Rob Herring wrote: > On Mon, Nov 07, 2016 at 03:39:32PM +0530, Pankaj Dubey wrote: >> Add Device Tree binding documentation for the clocks >> outputs in the Maxim-8997 Power Management IC. >> >> CC: Michael Turquette <mturquette@xxxxxxxxxxxx> >> CC: Rob Herring <robh+dt@xxxxxxxxxx> >> CC: devicetree@xxxxxxxxxxxxxxx >> CC: linux-clk@xxxxxxxxxxxxxxx >> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> >> --- >> .../devicetree/bindings/clock/maxim,max8997.txt | 44 ++++++++++++++++++++++ >> .../bindings/regulator/max8997-regulator.txt | 3 ++ >> 2 files changed, 47 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/maxim,max8997.txt >> >> diff --git a/Documentation/devicetree/bindings/clock/maxim,max8997.txt b/Documentation/devicetree/bindings/clock/maxim,max8997.txt >> new file mode 100644 >> index 0000000..d2e2a74 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/maxim,max8997.txt >> @@ -0,0 +1,44 @@ >> +Binding for Maxim MAX8997 32k clock generator block >> + >> +This is a part of device tree bindings of MAX8997 multi-function device. >> +More information can be found in bindings/regulator/max8997-regulator.txt file. >> + >> +The MAX8997 contains two 32.768khz clock outputs that can be controlled >> +(gated/ungated) over I2C. >> + >> +Following properties should be presend in main device node of the MFD chip. >> + >> +Required properties: >> + >> +- #clock-cells: from common clock binding; shall be set to 1. >> + >> +Optional properties: >> +- clock-output-names: From common clock binding. >> + >> +Each clock is assigned an identifier and client nodes can use this identifier >> +to specify the clock which they consume. Following indices are allowed: >> + - 0: 32khz_ap clock, >> + - 1: 32khz_cp clock, >> + >> +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max8997.h >> +header and can be used in device tree sources. >> + >> +Example: Node of the MFD chip >> + >> + max8997: max8997_pmic@66 { > > pmic@66 { > > With that: > > Acked-by: Rob Herring <robh@xxxxxxxxxx> > > Thanks for review and ack. With above mentioned change I will post v2 soon. Thanks, Pankaj Dubey -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html