From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
On i.MX31 AVIC interrupt controller base address is at 0x68000000.
The problem was shadowed by the AVIC driver, which takes the correct
base address from a SoC specific header file.
Fixes: d2a37b3d91f4 ("ARM i.MX31: Add devicetree support")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
---
arch/arm/boot/dts/imx31.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index c534c1f..179335b 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -31,11 +31,11 @@
};
};
- avic: avic-interrupt-controller@60000000 {
+ avic: interrupt-controller@68000000 {
compatible = "fsl,imx31-avic", "fsl,avic";
interrupt-controller;
#interrupt-cells = <1>;
- reg = <0x60000000 0x100000>;
+ reg = <0x68000000 0x100000>;
};
soc {
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
