---
.../devicetree/bindings/misc/mux-gpio.txt | 76 ++++++++++++++++++++++
1 file changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/mux-gpio.txt
diff --git a/Documentation/devicetree/bindings/misc/mux-gpio.txt b/Documentation/devicetree/bindings/misc/mux-gpio.txt
new file mode 100644
index 000000000000..8c1745ecd4ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mux-gpio.txt
@@ -0,0 +1,76 @@
+GPIO-based multiplexer controller bindings
+
+Define what GPIO pins are used to control a multiplexer. Or several
+multiplexers, if the same pins control more than one multiplexer.
+
+Required properties:
+- compatible : "mux-gpio"
+- mux-gpios : list of gpios used to control the multiplexer, least
+ significant bit first.
+
+Example:
+ control_mux: control-adc-mux {
+ compatible = "mux-gpio";
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ adc-mux {
+ compatible = "iio-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ control-muxes = <&control_mux>;
+ control-mux-names = "mux";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sync-1@0 {
+ reg = <0>;
+ };
+
+ in@1 {
+ reg = <1>;
+ };
+
+ out@2 {
+ reg = <2>;
+ };
+
+ sync-2@3 {
+ reg = <3>;
+ };
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux-simple,mux-locked";
+ i2c-parent = <&i2c1>;
+
+ control-muxes = <&control_mux>;
+ control-mux-names = "mux";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307: oled@3c {
+ /* ... */
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555: pca9555@20 {
+ /* ... */
+ };
+ };
+ };
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
