On Wed, 2016-11-16 at 09:11 -0600, Rob Herring wrote: > On Tue, Nov 15, 2016 at 03:29:13PM +0100, Jerome Brunet wrote: > > > > Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> > > Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> > > --- > > .../devicetree/bindings/net/realtek-phy.txt | 20 > > ++++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/realtek- > > phy.txt > > > > diff --git a/Documentation/devicetree/bindings/net/realtek-phy.txt > > b/Documentation/devicetree/bindings/net/realtek-phy.txt > > new file mode 100644 > > index 000000000000..dc2845a6b387 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/realtek-phy.txt > > @@ -0,0 +1,20 @@ > > +Realtek Ethernet PHY > > + > > +Some boards require special tuning values of the phy. > > + > > +Optional properties: > > + > > +realtek,disable-eee-1000t: > > +realtek,disable-eee-100tx: > > Make these generic/common. Same feedback from the net folks. Will do. Thx Rob > > > > > + If set, respectively disable 1000-BaseT and 100-BaseTx energy > > efficient > > + ethernet capabilty advertisement > > + default: Leave the phy default settings unchanged (capabilities > > advertised) > > + > > +Example: > > + > > +&mdio0 { > > + ethernetphy0: ethernet-phy@0 { > > + reg = <0>; > > + realtek,disable-eee-1000t; > > + }; > > +}; > > -- > > 2.7.4 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe > > devicetree" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html