From: Petr Kulhavy <petr@xxxxxxxxx>
DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver.
Signed-off-by: Petr Kulhavy <petr@xxxxxxxxx>
Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/usb/da8xx-usb.txt | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/da8xx-usb.txt
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
new file mode 100644
index 0000000..ccb844a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -0,0 +1,43 @@
+TI DA8xx MUSB
+~~~~~~~~~~~~~
+For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+ - compatible : Should be set to "ti,da830-musb".
+
+ - reg: Offset and length of the USB controller register set.
+
+ - interrupts: The USB interrupt number.
+
+ - interrupt-names: Should be set to "mc".
+
+ - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
+
+ - phys: Phandle for the PHY device
+
+ - phy-names: Should be "usb-phy"
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+ - vbus-supply: Phandle to a regulator providing the USB bus power.
+
+Example:
+ usb_phy: usb-phy {
+ compatible = "ti,da830-usb-phy";
+ #phy-cells = <0>;
+ status = "okay";
+ };
+ usb0: usb@200000 {
+ compatible = "ti,da830-musb";
+ reg = <0x00200000 0x10000>;
+ interrupts = <58>;
+ interrupt-names = "mc";
+
+ dr_mode = "host";
+ vbus-supply = <&usb_vbus>;
+ phys = <&usb_phy 0>;
+ phy-names = "usb-phy";
+
+ status = "okay";
+ };
--
2.7.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
