On 2016/11/15 17:35, Heiko Stuebner wrote:
Hi Andy,
Am Montag, 14. November 2016, 20:03:01 CET schrieb Andy Yan:
From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
This adds the dt-binding documentation for the clock and reset unit
found on Rockchip rk1108 SoCs.
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
---
Changes in v2: None
.../bindings/clock/rockchip,rk1108-cru.txt | 60
++++++++++++++++++++++ 1 file changed, 60 insertions(+)
create mode 100644
Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt new file
mode 100644
index 0000000..4d2356b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk1108-cru.txt
@@ -0,0 +1,60 @@
+* Rockchip RK1108 Clock and Reset Unit
+
+The RK1108 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk1108-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock
status. +
+Each clock is assigned an identifier and client nodes can use this
identifier +to specify the clock which they consume. All available clocks
are defined as +preprocessor macros in the dt-bindings/clock/rk1108-cru.h
headers and can be +used in device tree sources. Similar macros exist for
the reset sources in +these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "cif_clkout" - output clock for the cif - optional
+ - "mipi_csi_clkout" - output clock for the mipi csi - optional
+ - "pclkin_vip" - external VIP clock - optional
+ - "ext_i2s" - external I2S clock - optional
+ - "ext_gmac" - external GMAC clock - optional
+ - "mac_ref_clkout" - output clock of the pll in the mac phy
we really only want to list the actual input clocks here, not outputs.
Also, the list of actual input clocks seems incomplete (hdmiphy, usbphy) and
some clocks listed here do not match the clock controller 2 patches later
(pclkin_vip, ext_gmac [rk1108 only has 10/100], ext_i2s, ...)
yup, I was just listing the basic clock for Andy to bring up rk1108
board, so some of them was missing here. I will fix them here as well
as adding all of the input clocks in the clock driver. :)
Heiko
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
--
Best Regards
Shawn Lin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
