If DW_MMC_CARD_NO_USE_HOLD isn't set, it's usesd by default. Enve if SDMMC_CMD_USB_HOLD_REG is set in prepare_command(), but it doesn't set in pre_stop_abort(). To maintain the consistency, add the checking condition for this. Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> Tested-by: Heiko Stuebner <heiko@xxxxxxxxx> --- drivers/mmc/host/dw_mmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index be36f48..3cda68c 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -337,6 +337,9 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd) cmdr = stop->opcode | SDMMC_CMD_STOP | SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP; + if (!test_bit(DW_MMC_CARD_NO_USE_HOLD, &host->cur_slot->flags)) + cmdr |= SDMMC_CMD_USE_HOLD_REG; + return cmdr; } -- 2.10.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
