Re: [PATCH 1/2] devicetree/bindings: display: Add bindings for LVDS panels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Rob,

Ping ?

On Monday 17 Oct 2016 15:42:56 Laurent Pinchart wrote:
> On Friday 14 Oct 2016 07:40:14 Rob Herring wrote:
> > On Sun, Oct 9, 2016 at 11:33 AM, Laurent Pinchart wrote:
> >> On Saturday 08 Oct 2016 20:29:39 Rob Herring wrote:
> >>> On Tue, Oct 04, 2016 at 07:23:29PM +0300, Laurent Pinchart wrote:
> >>>> LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A.
> >>>> Multiple incompatible data link layers have been used over time to
> >>>> transmit image data to LVDS panels. This binding supports display
> >>>> panels compatible with the JEIDA-59-1999, Open-LDI and VESA SWPG
> >>>> specifications.
> >>>> 
> >>>> Signed-off-by: Laurent Pinchart
> >>>> <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> >>>> ---
> >>>> 
> >>>>  .../bindings/display/panel/panel-lvds.txt          | 119 ++++++++++++
> >>>>  1 file changed, 119 insertions(+)
> >>>>  create mode 100644
> >>>>  Documentation/devicetree/bindings/display/panel/panel-lvds.txt>
> >>>> 
> >>>> diff --git
> >>>> a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> >>>> b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> >>>> new file mode 100644
> >>>> index 000000000000..250861f2673e
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> >>>> @@ -0,0 +1,119 @@
> >>>> +Generic LVDS Panel
> >>>> +==================
> >>>> +
> >>>> +LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A.
> >>>> Multiple
> >>>> +incompatible data link layers have been used over time to transmit
> >>>> image data
> >>>> +to LVDS panels. This bindings supports display panels compatible with
> >>>> the
> >>>> +following specifications.
> >>>> +
> >>>> +[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999,
> >>>> February
> >>>> +1999 (Version 1.0), Japan Electronic Industry Development Association
> >>>> (JEIDA)
> >>>> +[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95),
> >>>> National
> >>>> +Semiconductor
> >>>> +[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0),
> >>>> Video
> >>>> +Electronics Standards Association (VESA)
> >>>> +
> >>>> +Device compatible with those specifications have been marketed under
> >>>> the
> >>>> +FPD-Link and FlatLink brands.
> >>>> +
> >>>> +
> >>>> +Required properties:
> >>>> +- compatible: shall contain "panel-lvds"
> >>> 
> >>> Maybe as a fallback, but on its own, no way.
> >> 
> >> Which brings an interesting question: when designing generic DT
> >> bindings, what's the rule regarding
> 
> Looks like I forgot part of the question. I meant to ask what is the rule
> regarding usage of more precise compatible strings ?
> 
> For instance (but perhaps not the best example), the
> input/rotary-encoder.txt bindings define a "rotary-encoder" compatible
> string, with no other bindings defining more precise compatible strings for
> the exact rotary encoder model. When it comes to panels I believe it makes
> sense to define model-specific compatible strings even if they're unused by
> drivers. I'm however wondering what the rule is there, and where those
> device-specific compatible strings should be defined. I'd like to avoid
> using one file per panel model as done today for the simple-panel bindings.
> 
> > Call it "simple" so I can easily NAK it. :)
> > 
> > Define a generic structure, not a single binding trying to serve all.
> > 
> >>> > +- width-mm: panel display width in millimeters
> >>> > +- height-mm: panel display height in millimeters
> >>> 
> >>> This is already documented for all panels IIRC.
> >> 
> >> Note that this DT binding has nothing to do with the simple-panel
> >> binding. It is instead similar to the panel-dpi and panel-dsi-cm bindings
> >> (which currently don't but should specify the panel size in DT). The LVDS
> >> panel driver will *not* include any panel-specific information such as
> >> size or timings, these are specified in DT.
> > 
> > The panel bindings aren't really different. The biggest difference was
> > location in the tree, but we now generally allow panels to be either a
> > child of the LCD controller or connected with OF graph. We probably
> > need to work on restructuring the panel bindings a bit. We should have
> > an inheritance with a base panel binding of things like size, label,
> > graph, backlight, etc, then perhaps an interface specific bindings for
> > LVDS, DSI, and parallel, then a panel specific binding. With this the
> > panel specific binding is typically just a compatible string and which
> > inherited properties apply to it.
> 
> That sounds good to me, but we have multiple models for panel bindings.
> 
> As you mentioned panels can be referenced through an LCD controller node
> property containing a phandle to the panel node, or through OF graph. That's
> a situation we have today, and we need to keep supporting both (at least
> for existing panels, perhaps not for the new ones).
> 
> Another difference is how to express panel data such as size and timings.
> The simple-panel DT bindings don't contain such data and expects the
> drivers to contain a table of panel data for all models supported, while
> the DPI, DSI and now the proposed LVDS panel bindings contain properties
> for panel data.
> 
> How would you like to reconcile all that ?
> 
> >>>> +- data-mapping: the color signals mapping order, "jeida-18",
> >>>> "jeida-24"
> >>>> +  or "vesa-24"
> >>> 
> >>> Maybe this should be part of the compatible.
> >> 
> >> I've thought about it, but given that some panels support selecting
> >> between multiple modes (through a mode pin that is usually hardwired), I
> >> believe a separate DT property makes sense.
> > 
> > Okay.
> > 
> >> Furthermore, LVDS data organization is controlled by the combination of
> >> both data-mapping and data-mirror. It makes little sense from my point
> >> of view to handle one as part of the compatible string and the other one
> >> as a separate property.
> >> 
> >>> > +Optional properties:
> >>> > +- label: a symbolic name for the panel
> >>> 
> >>> Could be for any panel or display connector.
> >> 
> >> Yes, but I'm not sure to understand how that's relevant :-)
> > 
> > Meaning it should be a common property.
> 
> Sure. So you expect me to reorganize all the panels and connectors DT
> bindings in order to get this one merged ? :-)
> 
> >>>> +- avdd-supply: reference to the regulator that powers the panel
> >>>> analog supply
> >>>> +- dvdd-supply: reference to the regulator that powers the panel
> >>>> digital supply
> >>> 
> >>> Which one has to be powered on first, what voltage, and with what time
> >>> in between? This is why "generic" or "simple" bindings don't work.
> >> 
> >> The above-mentioned specifications also define connectors, pinouts and
> >> power supplies, but many LVDS panels compatible with the LVDS physical
> >> and data layers use a different connector with small differences in
> >> power
> >> supplies.
> >> 
> >> I believe the voltage is irrelevant here, it doesn't need to be
> >> controlled by the operating system. Power supplies order and timing is
> >> relevant, I'll investigate the level of differences between panels. I'm
> >> also fine with dropping those properties for now.
> > 
> > Whether you have control of the supplies is dependent on the board.
> > Dropping them is just puts us in the simple binding trap. The simple
> > bindings start out that way and then people keep adding to them.
> 
> Damn, you can't be fooled easily ;-)
> 
> On a more serious note, I'd like to design the bindings in a way that
> wouldn't require adding device-specific code in the driver for each panel
> model, given that in most cases power supply handling will be generic.
> What's your opinion about a generic power supply model that would be used
> in the default case, with the option to override it with device-specific
> code when needed ?
>
> >>>> +- data-mirror: if set, reverse the bit order on all data lanes (6 to
> >>>> 0 instead
> >>>> +  of 0 to 6)
> > 
> > On this one, make the name describe the order. "mirror" requires that
> > I know what is normal ordering. Perhaps "data-msb-first".
> 
> Sounds good to me, I'll use that.

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux