Re: [PATCH v3] dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




* H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [161114 03:55]:
> DDR3L is usually specified as
> 
> 	JEDEC standard 1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V)
> 
> Therefore setting smps6 regulator to 1.2V is definitively below
> minimum. It appears that real world chips are more forgiving than
> data sheets indicate, but let's set the regulator right.
> 
> Note: a board that uses other voltages (DDR with 1.5V) can
> overwrite by referencing &smps6_reg.

Applying into omap-for-v4.9/fixes thanks.

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux