[PATCH v2 03/19] ARM: dts: armada-370-xp: add node labels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




As it was previously done for kirkwood, this adds missing node labels to
Armada 370 and XP common and SoC specific nodes to allow to reference
them more easily.

Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/armada-370-xp.dtsi     | 32 ++++++++++++++++----------------
 arch/arm/boot/dts/armada-370.dtsi        | 20 ++++++++++----------
 arch/arm/boot/dts/armada-xp-mv78230.dtsi | 12 ++++++------
 arch/arm/boot/dts/armada-xp-mv78260.dtsi | 20 ++++++++++----------
 arch/arm/boot/dts/armada-xp-mv78460.dtsi | 22 +++++++++++-----------
 arch/arm/boot/dts/armada-xp.dtsi         | 12 ++++++------
 6 files changed, 59 insertions(+), 59 deletions(-)

diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 1d8171380fa0..54359896b76c 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -86,7 +86,7 @@
 		pcie-mem-aperture = <0xf8000000 0x7e00000>;
 		pcie-io-aperture  = <0xffe00000 0x100000>;
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -96,7 +96,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -106,7 +106,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -116,7 +116,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -126,7 +126,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -142,7 +142,7 @@
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
-			rtc@10300 {
+			rtc: rtc@10300 {
 				compatible = "marvell,orion-rtc";
 				reg = <0x10300 0x20>;
 				interrupts = <50>;
@@ -214,38 +214,38 @@
 				msi-controller;
 			};
 
-			coherency-fabric@20200 {
+			coherencyfab: coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
 				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
-			timer@20300 {
+			timer: timer@20300 {
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				reg = <0x20300 0x34>, <0x20704 0x4>;
 			};
 
-			cpurst@20800 {
+			cpurst: cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x8>;
 			};
 
-			pmsu@22000 {
+			pmsu: pmsu@22000 {
 				compatible = "marvell,armada-370-pmsu";
 				reg = <0x22000 0x1000>;
 			};
 
-			usb@50000 {
+			usb0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
 				interrupts = <45>;
 				status = "disabled";
 			};
 
-			usb@51000 {
+			usb1: usb@51000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x51000 0x500>;
 				interrupts = <46>;
@@ -274,7 +274,7 @@
 				status = "disabled";
 			};
 
-			sata@a0000 {
+			sata: sata@a0000 {
 				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <55>;
@@ -283,7 +283,7 @@
 				status = "disabled";
 			};
 
-			nand@d0000 {
+			nand: nand@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
@@ -293,7 +293,7 @@
 				status = "disabled";
 			};
 
-			mvsdio@d4000 {
+			sdio: mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
 				interrupts = <54>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 79b5463209aa..5ed086da1e51 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -70,7 +70,7 @@
 			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
 		};
 
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -89,7 +89,7 @@
 				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
 				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -106,7 +106,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -190,7 +190,7 @@
 				pinctrl-names = "default";
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x100>;
 			};
@@ -208,14 +208,14 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@18300 {
+			thermal: thermal@18300 {
 				compatible = "marvell,armada370-thermal";
 				reg = <0x18300 0x4
 					0x18304 0x4>;
 				status = "okay";
 			};
 
-			sscg@18330 {
+			sscg: sscg@18330 {
 				reg = <0x18330 0x4>;
 			};
 
@@ -233,7 +233,7 @@
 				clocks = <&coreclk 2>;
 			};
 
-			cpu-config@21000 {
+			cpuconf: cpu-config@21000 {
 				compatible = "marvell,armada-370-cpu-config";
 				reg = <0x21000 0x8>;
 			};
@@ -256,7 +256,7 @@
 				clocks = <&coreclk 0>;
 			};
 
-			xor@60800 {
+			xor0: xor@60800 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60A00 0x100>;
@@ -275,7 +275,7 @@
 				};
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -302,7 +302,7 @@
 				compatible = "marvell,armada-370-neta";
 			};
 
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-370-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 6e6d0f04bf2b..ebf79d6de1a1 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -86,7 +86,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x1 only.
 		 */
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -114,7 +114,7 @@
 				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
 				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -131,7 +131,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -148,7 +148,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -165,7 +165,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -182,7 +182,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index c5fdc99f0dbe..34e78a568460 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -87,7 +87,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x4 only.
 		 */
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -129,7 +129,7 @@
 				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
 				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -146,7 +146,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -163,7 +163,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -180,7 +180,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -197,7 +197,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -214,7 +214,7 @@
 				status = "disabled";
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
@@ -231,7 +231,7 @@
 				status = "disabled";
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
@@ -248,7 +248,7 @@
 				status = "disabled";
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
@@ -265,7 +265,7 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 0e24f1a38540..5148827ed934 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -104,7 +104,7 @@
 		 * configured as x4 or quad x1 lanes. Two units are
 		 * x4/x1.
 		 */
-		pcie-controller {
+		pciec: pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -150,7 +150,7 @@
 				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
 				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
@@ -167,7 +167,7 @@
 				status = "disabled";
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
@@ -184,7 +184,7 @@
 				status = "disabled";
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
@@ -201,7 +201,7 @@
 				status = "disabled";
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
@@ -218,7 +218,7 @@
 				status = "disabled";
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
@@ -235,7 +235,7 @@
 				status = "disabled";
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
@@ -252,7 +252,7 @@
 				status = "disabled";
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
@@ -269,7 +269,7 @@
 				status = "disabled";
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
@@ -286,7 +286,7 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
@@ -303,7 +303,7 @@
 				status = "disabled";
 			};
 
-			pcie@10,0 {
+			pcie10: pcie@10,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 				reg = <0x5000 0 0 0 0>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index e141de2a4a1c..654a61e525b4 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -118,7 +118,7 @@
 				status = "disabled";
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x500>;
 			};
@@ -136,7 +136,7 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@182b0 {
+			thermal: thermal@182b0 {
 				compatible = "marvell,armadaxp-thermal";
 				reg = <0x182b0 0x4
 					0x184d0 0x4>;
@@ -191,7 +191,7 @@
 				clocks = <&gateclk 19>;
 			};
 
-			usb@52000 {
+			usb2: usb@52000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x52000 0x500>;
 				interrupts = <47>;
@@ -199,7 +199,7 @@
 				status = "disabled";
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -227,7 +227,7 @@
 				compatible = "marvell,armada-xp-neta";
 			};
 
-			crypto@90000 {
+			cesa: crypto@90000 {
 				compatible = "marvell,armada-xp-crypto";
 				reg = <0x90000 0x10000>;
 				reg-names = "regs";
@@ -247,7 +247,7 @@
 				status = "disabled";
 			};
 
-			xor@f0900 {
+			xor0: xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100
 				       0xF0B00 0x100>;
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux