Re: [PATCHv3 2/4] misc: Add Altera Arria10 System Resource Control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Nov 02, 2016 at 09:32:56AM -0500, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> 
> This patch adds the Altera Arria10 control & monitoring
> functions to the Arria10 System Resource chip.
> 
> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> ---
> v2  Change compatible string and filename from -mon to -monitor
>     Change CONFIG from module to builtin.
>     Make wm_rst register writeable.
> v3  Remove unused ret variable.
>     Shorten driver name (remove altr_).
> ---
>  MAINTAINERS                         |   1 +
>  drivers/misc/Kconfig                |   7 ++
>  drivers/misc/Makefile               |   1 +
>  drivers/misc/altera-a10sr-monitor.c | 175 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 184 insertions(+)
>  create mode 100644 drivers/misc/altera-a10sr-monitor.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b180821..baf2404 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -635,6 +635,7 @@ M:	Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
>  S:	Maintained
>  F:	drivers/gpio/gpio-altera-a10sr.c
>  F:	drivers/mfd/altera-a10sr.c
> +F: 	drivers/misc/altera-a10sr-monitor.c
>  F:	include/linux/mfd/altera-a10sr.h
>  
>  ALTERA TRIPLE SPEED ETHERNET DRIVER
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 64971ba..f42d459 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -766,6 +766,13 @@ config PANEL_BOOT_MESSAGE
>  	  An empty message will only clear the display at driver init time. Any other
>  	  printf()-formatted message is valid with newline and escape codes.
>  
> +config ALTERA_A10SR_MONITOR
> +	bool "Altera Arria10 System Resource Monitor"
> +	depends on MFD_ALTERA_A10SR
> +	help
> +	  This enables the System Resource monitor driver for the Altera
> +	  Arria10 DevKit.
> +
>  source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 3198336..9f6e77a 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -43,6 +43,7 @@ obj-y				+= ti-st/
>  obj-y				+= lis3lv02d/
>  obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
>  obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
> +obj-$(CONFIG_ALTERA_A10SR_MONITOR)	+= altera-a10sr-monitor.o
>  obj-$(CONFIG_INTEL_MEI)		+= mei/
>  obj-$(CONFIG_VMWARE_VMCI)	+= vmw_vmci/
>  obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lattice-ecp3-config.o
> diff --git a/drivers/misc/altera-a10sr-monitor.c b/drivers/misc/altera-a10sr-monitor.c
> new file mode 100644
> index 0000000..66338e0
> --- /dev/null
> +++ b/drivers/misc/altera-a10sr-monitor.c
> @@ -0,0 +1,175 @@
> +/*
> + * Altera Arria10 DevKit System Resource Chip Monitor Driver
> + *
> + * Author: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> + *
> + * Copyright Intel Corporation (C) 2014-2016. All Rights Reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Monitor driver for the Altera Arria10 MAX5 System Resource Chip
> + * Adapted from ics932s401.c
> + */
> +
> +#include <linux/err.h>
> +#include <linux/mfd/altera-a10sr.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +struct altr_a10sr_regs {
> +	struct regmap		*regmap;
> +	struct attribute_group	attr_grp;
> +};
> +
> +static ssize_t a10sr_show(struct device *dev,
> +			  struct device_attribute *devattr, char *buf);
> +static ssize_t a10sr_store(struct device *dev,
> +			   struct device_attribute *devattr, const char *buf,
> +			   size_t count);
> +
> +/* Define FS entries */
> +static DEVICE_ATTR(max5_version, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_led, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_button, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_button_irq, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_pg1, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_pg2, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_pg3, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_fmcab, 0444, a10sr_show, NULL);
> +static DEVICE_ATTR(max5_hps_resets, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_per_resets, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_sfpa, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_sfpb, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_i2c_master, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_wm_rst, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_wm_rst_key, 0644, a10sr_show, a10sr_store);
> +static DEVICE_ATTR(max5_pmbus, 0644, a10sr_show, a10sr_store);

Please add a Documentation/ABI file to describe all of thes new sysfs
files that you are saying will be present for all of time.

And do you really want userspace access like this to these values?
Shouldn't things like the led and button use the proper led and input
layers instead?


> +static int altr_a10sr_regs_probe(struct platform_device *pdev)
> +{
> +	struct altr_a10sr_regs *a10regs;
> +	struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
> +
> +	a10regs = devm_kzalloc(&pdev->dev, sizeof(*a10regs), GFP_KERNEL);
> +	if (!a10regs)
> +		return -ENOMEM;
> +
> +	a10regs->regmap = a10sr->regmap;
> +	a10regs->attr_grp = a10sr_attr_group;
> +
> +	platform_set_drvdata(pdev, a10regs);
> +
> +	return sysfs_create_group(&pdev->dev.kobj, &a10sr_attr_group);

You just raced userspace and lost :(

Please set the group file properly, and then the driver core should set
this up for you correctly.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux